Composites 2022
48Pages

HOLDINGS LIMITED DESIGN MANUFACTURE SUPPLY WORLDWIDE DIAMOND TOOLING SOLUTIONS

D.K. Holdings Limited has been manufacturing diamond tools and associated products since 1959. wWe have developed a unique expertise in producing and supplying diamond tooling specifically for the composites industry. Our products are made to the highest quality standards. We are accredited with the approved quality management system BS EN ISO 9001 : 2015 for manufacture and supply of our products. DIAMOND TOOLS Electroplated, electroformed, metal bond and resin bond diamond tools are used on various materials because of very fast clean cutting, long life, versatility of design and...

HAND MACHINES Hi-Di Routers Holesaws & Accessories Integral Spindle Saws Jigsaw Blades M-N-O Metal Bond Core Drills Needle Files Bosch Jigsaw Machine P-Q Parallel Routers Plastic Wedges Piercing Routers Pyramid Vanity Saws Corrugated Toothed Saw CUTTING R Replating Service Routers Dia-Dry Discs Dia-Met Hand Pads Dome Ended Routers Drill Countersinks E Electroflex - Pads, Drums, Discs, Hand Files Electroflex Hand Pads Side Spoke Saws 20,22-23 21 SPECIALS Surface Planers Technical Specification Grasso Router GRINDING GRP/GRE Pipes Gulleted Saws Titan Dry Grind Discs F-G Fein - Multimaster MM...

DK DIAMOND SAWS FOR THE COMPOSITES INDUSTRY As one of the world leaders in diamond blade technology we are pleased to offer a complete range of high quality diamond blades for the Composites Industry. We offer the majority of our blades from stock but we also have the ability to manufacture a diamond blade to your specifications/requirements. APPLICATIONS CONTINUOUS RIM: For fast straight line cutting with long life - see page 2. SIDE SPOKE: Engineered to cut curves without jamming - see page 3. GULLETED: Fast cutting with gullets allowing cooling action - see page 4. PYRAMID: For straight...

CONTINUOUS RIM SAWS For fast straight cutting of materials. Can be used in hand tools or on stationary machines at speeds between 1500 and 3000 surface metres per minute. OPTIONS: NOTE: Can be supplied in a variety of diamond grades and widths. Normally saws over 40mm diameter are coated with 3mm down the sides and the larger saws have a deeper coating. Saws are made with bore sizes to suit customers’ requirements which should be stated on order. Saws coated in 36/44 grit are approximately 0.4mm wider than nominal width. CONTINUOUS RIM ELECTROPLATED DIAMOND BLADE NOTE: Other sizes...

SIDE SPOKE SAWS This design allows the blade to cut curves without jamming or stalling the machine. OPTIONS: Note: Can be supplied in a variety of diamond grades and widths. Also with 3 or 4 side spokes each side. Normally supplied with 3 spokes each side. Larger sizes can be supplied with 4 spokes per side. Saws are made with bore sizes to suit customers’ requirements which should be stated on order. Saws coated in 36/44 grit are approximately 0.4mm wider than nominal width. SIDE SPOKE DIAMETER (mm) 3 SPOKES EACH SIDE ELECTROPLATED DIAMOND SIDE SPOKE SAW NOTE: Other sizes available, prices...

GULLETED SAWS The gullets allow clearance and cool cutting. Ideal for fast aggressive cutting of sheets, pipes and all materials over 20mm thick. OPTIONS: NOTE: Can be supplied in a variety of diamond grades and widths. Normally saws are coated a minimum 3mm down the sides and are made with bore sizes to suit customers’ requirements which should be stated on order. Saws coated in 36/44 grit are approximately 0.4mm wider than nominal width. Silent centre saws are available on request. These saws lower the level of noise produced. GULLETED SAWS HAND MACHINES - Pages 30 - 31 OTHER RELATED...

CORRUGATED TOOTHED SAW Diamond coated 44/60 saw with serrated teeth for Kevlar®, Twaron® and Aramid fibres and also recommended for Carbon/Kevlar and Glass/ Kevlar woven composite materials. The serrated teeth help to shear the fibre. OPTIONS: SERRATED TOOTHED ELECTROPLATED DIAMOND BLADES PYRAMID SAWS For heavy duty hand trimming and sawing on GRP mouldings and other applications. Allows “side grinding“ as well as cutting. OPTIONS: Diameters — 100, 125 & 230mm Grade — 36/44 NOTE: All saws are made with bore sizes to suit customers’ requirements which should be stated when ordering. Saws...

CONTINUOUS & SIDE SPOKED INTEGRAL SPINDLE SAWS INTEGRAL SPINDLE SAWS Used where it is necessary to cut close into a corner and where a boss or locking nut would get in the way. The blade and spindle are made in one piece and present an absolutely flush side to the work. OPTIONS: Diameters Configuration 25 - 75mm Continuous Rim Side Spoke NOTE: Can be supplied in a variety of diamond grades and widths. All saws are coated a nominal 2mm down the sides. Please state shank diameter and length when ordering. Saws coated in 36/44 grit are approximately 0.4mm wider than nominal width. Other sizes...

BANDSAW BLADES Diamond coated bandsaws are made from high quality steel with the leading edge coated with diamond giving a continuous ribbon of aggressive cutting action. Both straight cut and curves can be easily achieved, bearing in mind the tighter the curve required, the narrower width of bandsaw needed. Supplied ready welded to your exact required length or available in coils up to 39 metres long. OPTIONS: Continuous Coated Castellated Edge (for thicker materials) Blade Widths 12, 19, 25mm DIAMOND BANDSAW BLADES Tension Gauge JIGSAW BLADES Diamond coated for free cutting with clean...

A wide selection of holesaws is available for both site and factory use when cutting holes in composites. SPECIAL HOLESAWS Type 1 - Automatic Side Ejection - provides a very rapid method of dry cutting holes in GRP mouldings and laminates. Type 2 - Piloted with Spring Operated Core Ejection - for ease of location with core ejecting by means of a spring loaded plunger. HSS/Tungsten Carbide drill or plain pilot available. Type 3 - Spring Core Ejection without Pilot - designed for holesaws under 25mm diameter where limited internal space is available and will not accommodate a standard...