DESSALATOR SPECIFICATION SHEET FREEDOM 60 12 or 24 V DC Application: The D60 can be operated with DC power supplied from the engine alternator. Options: This model is available in Remote Control version or compact version. The Remote Control model is modular and the control panel can be mounted independently from the other major components. Size: Horizontal Control Panel –remote control: Pump and Motors Assembly: 12V motor: 24V motor: L 50 cm x D 30 cm x H 22 cm Pulley PJ5, 12V relay, drive belt 654PJ5 Pulley PJ5, 24V relay, drive belt 654PJ5 H 39 cm x D 24 cm x L 31 cm Standard 10 inch, 5 micron water filter Membrane Assembly: Power consumption: High pressure pump/motor unit: 550W max. at 12V or 24V DC 12V: 550W max – 32A (a fuse holder with 50A motor fuse is supplied). 24V: 550W max – 18A (A 25A starting curve circuit breaker is supplied) Module Elements of the Watermaker: Pre-filter assembly with fresh water rinse solenoid valve and key for the filter High pressure motor/pump assembly mounted on fixing base Membrane assembly comprises; two tubes containing two 25.21 membranes, end plates and retaining rods and associated high pressure hose connections and fresh water delivery connectors Front panel. comprising electric control box (fixed behind the front panel) with electronic controller, high pressure gauge, graduated medical flow-meter, pressure sensor, salinity probe, hour meter and operating status indicator lights. Accessories included: ½” thru-hull scoop type skin fitting with sea-cock and strainer High pressure hoses Ø 8mm – 8 m 2 pre-installed high pressure connectors and 2 to be fitted on installation (adapter supplied) Blue production hose Ø 8/10mm: 8m 1 spare pre-filter element (5 microns, 10 inch) 12V: Fuse holder with a 50A fuse or 24V: 25A circuit breaker Cable: Cable required: Working pressure: Between 60 and 65 Bars. Dessalator pressure gauge is marked with a green zone (registered design). Weight: 38 kg, boxed up: 54 kg