DESSALATOR SPECIFICATION SHEET FREEDOM 100 IN 12 / 24 V DC Application: The D100 can be operated with DC power supplied from the engine alternator. Options: This model is only available in Remote Control version. The Remote Control model is modular and the control panel can be mounted independently from the other major components. Size: Horizontal Control Panel: Pump and Motors Assembly: 12V motor: 24V motor: L 50 cm x W 33 cm x H 22 cm Pulley PJ5, 12V relay, drive belt 654PJ5 Pulley PJ5, 24V relay, drive belt 654PJ5 H 39 cm x D 24 cm x L 31 cm Standard 10 inch, 5 micron water filter Membrane Assembly: Power consumption: High pressure pump/motor unit: 700W max. at 12V or 24V DC 12V: 700W – 46A (a fuse holder with 63A motor fuse is supplied). 24V: 700W – 30A (A 40A starting curve circuit breaker is supplied) Module Elements of the Watermaker: Pre-filter assembly with fresh water rinse solenoid valve and key for the filter High pressure motor/pump assembly mounted on fixing base Membrane assembly comprises; three tubes containing three 25.21 membranes, end plates and retaining rods and associated high pressure hose connections and fresh water delivery connectors Front panel: comprising electric control box (fixed behind the front panel) with electronic controller, high pressure gauge, graduated medical flow-meter, pressure sensor, salinity probe, hour meter and operating status indicator lights. Accessories included: ½” thru-hull scoop type skin fitting with sea-cock and strainer High pressure hoses Ø 8mm – 8 m 2 pre-installed high pressure connectors and 2 to be fitted on installation (adapter supplied) Blue production hose Ø 8/10mm: 8m 1 spare pre-filter element (5 microns, 10 inch) Cable: Cable required: Working pressure: Between 60 and 65 Bars. Dessalator pressure gauge is marked with a green zone (registered design). Weight: 45 kg, boxed up: 62 kg