DESSALATOR - D90 PRO in 230 or 400V Specification sheet Application: Intensive use Versions: • Remote control (please specify it when ordering) with: - Horizontal front panel: L 41 cm x H 24 cm x D 15 cm - or vertical: L 22 cm x H 43 cm x D 12 cm (separated electric box) High pressure motor unit 1,5 KW : L 46cm x W 33 x H 30 • compact - ABS frame in L : L 58 cm x 38 cm x D 48 cm Elements of the water maker: • Basket pre filter: bronze pre filter (directly on the hull valve) • Low pressure pump: 300 Watts (to be installed under the water line) with a condenser of 12.5 Micro Farads (except three-phased model) • Double pre filtration container with rinsing solenoid valve: Filters in 10 inches, 25 et 5 microns, H 36cm x W 36cm x D 18 cm and key for the pre filter • High pressure motor unit: 1.5 KW with 1 condenser of 50 Micro farads parallel, with soft start and 156 Microfarad capacitor • 1 25.40 Membrane unit - Dimensions: L 120 cm x 10 x 12 cm including: a tube, a membrane, 2 flasks, 1 full membrane end cap fitting and 1 tapped membrane end cap fitting (both with a stainless steel segment), 4 straps, screws • Front panel • Electric box with controller fixed on the front panel (except vertical front panel) • Manometers (high and low pressure) fixed behind the front panel. • Graduated flow meter (fixed behind the front panel) • Pressure captor • Analyse probe • Operating time meter • 3 indicator lights Accessories supplied: • Hull valve with strainer in % • High pressure tubes 0 8mm - 8 m • 2 mounted high pressure connectors and 2 to be mounted (with adaptor) • Capillar hose 0 4mm - 6m • Blue production hose 0 8/10mm : 6m • Change filters 25 and 5 microns (1 of each) Consumption (pre pump included): 230V: 10 A continuous. A D 25A circuit breaker is supplied. 400V: 5,2 A continuous (3 x 5,2 A when starting). A D 10A circuit breaker is supplied. Recommended cables: 230V: 3x2,5 mm2 cable 400V: 4x2,5 mm2 cable Working pressure: 60 to 65 Bars. Manometer with green zone Dessalator (registered model) Weight: 65 kg