DESSALATOR SPECIFICATION SHEET AC CRUISE 100 in 120 or 230 V AC Application: The SOLO can be operated with AC power supplied by a generator. Options: This model is only available in Remote Control version. The Remote Control model is modular and the control panel can be mounted independently from the other major components. Size: Horizontal Control Panel: L 32 cmx H 20 cm x D 15 cm Pump and Motors Assembly: Control box : L 50 cm x W 33 cm x H 25 cm in 12V or 24V (to be incidated on your order) Pulley PJ5 - Drive belt 758PJ5 H 39 cm x D 24 cm x W 31 cm Standard 10 inch, 5 micron water filter Membrane Assembly: L 70 cm x 27 cm x 12 cm Power consumption: High pressure pump/motor unit: 1.1KW at 120 or 230V AC (with 30pF Capacitor) 120V: 9A continuous (32A starting). A 32A circuit breaker is supplied. 230V: 5A continuous (10A starting). A 10A circuit breaker is supplied. Module Elements of the Watermaker: • Pre-filter assembly with fresh water rinse solenoid valve and key for the filter • High pressure motor/pump assembly mounted on fixing base • Membrane assembly comprises; three tubes containing three 25.21 membranes, end plates and retaining rods and associated high pressure hose connections and fresh water delivery connectors • Front panel. comprising electric control box (fixed behind the front panel) with electronic controller, high pressure gauge, graduated medical flow-meter, pressure sensor, salinity probe, hour meter and operating status indicator lights. Accessories included: • V” thru-hull scoop type skin fitting with sea-cock and strainer • High pressure hoses 0 8mm - 8 m • 2 pre-installed high pressure connectors and 2 to be fitted on installation (adapter supplied) • Blue production hose 0 8/10mm: 8m • 1 spare pre-filter element (5 microns, 10 inch) Cable: Cable supplied: 2 x 6m of 3x1.5mm2 for AC power supply to panel and AC motor feed Working pressure: Between 60 and 65 Bars. Dessalator pressure gauge is marked with a green zone (registered design).