Catalogs >
Desmi >
Marine & Offshore Pump Solutions

Marine & Offshore Pump Solutions
28Pages

Catalog excerpts

MARINE & OFFSHORE PUMP SOLUTIONS PROVEN TECHNOLOGY

DESMI centrifugal pumps are used as cooling, ballast, fire, and bilge pumps for fresh as well as seawater. The pumps are available with capacities up to 4000 m3/h / 141258 ft3 and delivery heads up to 220 mWC. Our product range is based on the modular principle which gives interchangeability of the most commonly used items and consequently a quick and safe supply of spare parts. DESMI pumps are also installed in many naval vessels where special requirements as to materials, shock resistance etc. apply. Single pumps or complete packages, DESMI's staff will always find the correct solution....

Open the catalog to page 2

Monobloc vs. Spacer Design Details Pumps With Ø 215 And Ø 265 Impeller Suction and discharge flange dimensions are identical. The line through inlet and outlet is flush with the centre line of the shaft. The pumps are mounted with one impeller wear ring. Pumps With Ø 330, Ø 415 and Ø525 Impeller Dimension of the suction flange is one size larger than that of the discharge flange. The line through inlet and outlet is tangential offset in relation to the centre line of the shaft. The pumps have two impeller wear rings. Monobloc With Bearing The pump is for major capacities and heavy loads,...

Open the catalog to page 3

DESMI Centrifugal Pumps (Horizontal Pumps) A DESMI speciality is horizontal, self-priming pumps where suction is based on the diffuser principle and the pump itself is able to evacuate the suction line at suction lifts up to 8.5 m / 278 ft. Modular S Self-priming Horizontal Centrifugal Pump Modular S Capacity range: 1-350 m3/h ~ 5-1500 US gpm at 50 Hz 2-400 m3/h ~ 10-1760 US gpm at 60 Hz Pressure range: 1-100 mLC~ 3-330 ft at 50 Hz 2-150 mLC ~ 6-490 ft at 60 Hz Temperature range: With standard mech. shaft seal max. 80oC ~ 176°F, with special mech. shaft seal max. 120oC ~ 248°F....

Open the catalog to page 4

DESMI Submerged Lubrication Oil Pump The DESLUBE series is a submerged deep-well pump designed for main engine lube oil supply for large two-stroke engines. Benefits: • Low NPSH • Low noise The design is based on our long-time experience of manufacturing deep-well pumps as well as the design features from our in-line centrifugal series. • Low vibration • Low maintenance costs The discharge socket is bolted to the dome flange and thus carries the pump without further suspension to the tank. • High reliability • High flexibility The DESLUBE pump should be used where good reliability and...

Open the catalog to page 5

DESMI Centrifugal Pumps - ESL feet

Open the catalog to page 6

feet meter Total head: 1 m - 3.281 feet

Open the catalog to page 7

feet meter Total head: 1 m = 3.281 feet • Best efficiency

Open the catalog to page 9

NOTE: All DSL-8P speed is 720 rpm ; But DSL600-550-10P speed is 590 rpm Total head: 1 m = 3.281 feet Best efficiency

Open the catalog to page 10

Total head: 1 m = 3.281 feet • Best efficiency

Open the catalog to page 11

DESMI Centrifugal Pumps - Modular S feet meter Total head: 1 m = 3.281 feet S 720 RPM • Best efficiency • Best efficiency

Open the catalog to page 12

DESMI Centrifugal Pumps - Modular S S 1450 RPM

Open the catalog to page 13

feet meter Total head: 1 m = 3.281 feet

Open the catalog to page 14

Total head: 1 m = 3.281 feet Best efficiency DESMI Centrifugal Pumps - SA Total head: 1 m = 3.281 feet Best efficiency

Open the catalog to page 15

Best efficiency DESMI Centrifugal Pumps - ESL Best efficiency

Open the catalog to page 17

NOTE: feet Total head:1 m = 3.281 feet DSL-8p speed is 864 rpm ; Best efficiency • Best efficiency

Open the catalog to page 20

meter feet Total head:1 m = 3.281 feet Best efficiency meter feet Total head:1 m = 3.281 feet DSL 3540 RPM • Best efficiency

Open the catalog to page 21

meter feet

Open the catalog to page 23

meter feet meter feet • Best efficiency

Open the catalog to page 24

Best efficiency meter feet

Open the catalog to page 25

All the ROTAN® models have a differential pressure up to 16 bar / 232 psi and a suction lift up to 0.8 bar / 11.6 psi vacuum while pumping. ROTAN® GP General purpose pumps in cast iron. The simple and compact construction makes it a competitive pump suitable for most applications. GP pump benefits: • Easy installation • Low maintenance costs • Small footprint • Low noise and vibration ROTAN® HD ROTAN® GP - Heavy Duty ROTAN® HD Heavy duty pumps in cast iron for a wide range of viscous, non-corrosive liquids. Designed for difficult applications and those involving high-viscosity oils. pump...

Open the catalog to page 26

The art of transporting water is finding the right solution, with maximum efficiency, for each situation. The DPV series of vertical, multistage, centrifugal pumps is the result of 55 years of experience and the pumps can be used for numerous applications. The new DPV pump series is revolutionary in terms of energy-savings and efficiency. Corrosion-free materials, advanced production methods and an optimised hydraulic assembly all contribute towards providing a unique example of craftsmanship. The modular construction of the product enables you to modify the pump according to your...

Open the catalog to page 27

Need more information or specifications? Contact us at desmi@desmi.com or read more about DESMI and DESMI’s other products and solutions at www.desmi.com MARINE & OFFSHORE INDUSTRY OIL SPILL RESPONSE DEFENCE & FUEL UTILITY www.desmi.com DESMI

Open the catalog to page 28

Marine & Offshore Pump Solutions 28Pages

Catalog excerpts

All Desmi catalogs and brochures

Marine & Offshore Pump Solutions
28Pages