DISCLAIMER Despite constant care and attention DHR puts in its manuals it is still possible that information in this manual is incomplete or incorrect. We do not guarantee that the information in the manual is suitable for the purpose for which the information was consulted. All information is offered in the state in which it actually is and without any (implicit) guarantee or warranty regarding its validity or its suitability for a particular purpose or otherwise. All illustrations are for illustrative purposes only. This manual is not intended to cover every possible detail about the product....

Electrical spec. Manoeuvring light 10 Positioning all-round light 12

Application: • For all sea-going vessels with a length of less than 50 metres • Rhine and European inland navigation • As general signalling light In compliance with: • International Regulations for Preventing Collisons at Sea; COLREG 72 and latest amendments • Rhine and European inland navigation rules • The Directives 96/98/EC and 82/714/EC, following the European standard: EN 14744 (2005) AC(2006), Inland navigation vessels and sea-going vessels - navigation light Materials: • Housing: Seawater resistant aluminium, hard anodised, matt black • LED driver: epoxy potted • Screen: Seawater resistant...

PRODUCT PHOTOS © Version 2.5 June 2016

AVAILABLE MODELS Sector lights Min. Visibility Colour Nom. Power Art. Code Stern red (Suez) 2 NM Red Convoy light 1 NM Blue All-round lights Min. Visibility Colour Nom. Power Art. Code

Item Part 1 Cover 10 Base plate gasket Material Seawater resistant aluminium, hard anodized black Neoprene - shore 30 Seawater resistant aluminium, hard anodized black Borosilicate glass Seawater resistant aluminium MC-PCB, aluminium 1.55 mm Body: Polyamide Seal: Neoprene PTFE Seawater resistant aluminium, hard anodized black Potting material: Polyurethane Neoprene - shore 30 Seawater resistant aluminium, hard anodized black Delrin - black Body: Silicone rubber Membrane: ePTFE Polyamide PTFE Base plate gasket Item Navigation light Description Number A Starboard All-round green B Port...

Grounding (PE) is not required, but gives better ESD/EMI protection Navigation light Power supply Nominal Typical Typical voltage wattage1 current1 Minimum operating cur rent Error current Inrush current Stern red (Suez light) 500 mA 4,3 W Panama steering light 350 mA 4,1 W Depends on temperature and LED production series

ELECTRICAL SPEC. MANOEUVRING LIGHT Output Grounding (PE) is not required, but gives better ESD/EMI protection Minimum Navigation light Power Nominal Typical Typical operating supply voltage wattage* current* current Manoeuvring 700 mA 24 VDC 15,9 W 662 mA >40 mA * Depends on temperature and LED production series LIFETIME CONTROL Measurements of the navigation light and specifications retrieved from the OEM, show a conformity with the minimum requirements of COLREG 72 at an operational lifetime of 50000 hrs. To guarantee a proper use of the LED navigation lights, we as a manufacturer advise the...

Disclaimer: • The minimum luminous intensity requirements in the forward direction are only guaranteed if the sidelights are mounted in accordance with this drawing and table. • This is an illustration to indicate the dimensions of the inboard screens, relative to the keel line of the vessel. By no means may this image be used to determine the position of the sidelights on the vessel. For positioning the lights at the vessel always check for compliance with COLREG 72 or local rules.

POSITIONING ALL-ROUND LIGHT S[mm] Diagram for choosing the minimum distance between obstacle and mounting plate. Disclaimer: This is an illustration to indicate the position of the all-round light so not to be obscured by mast, topmasts or structures within the angular sector of more than 6 degrees. By no means may this image be used to determine the position of the all-round lights on the vessel. For positioning the lights on the vessel always check for compliance with COLREG 72 or local rules.

MOUNTING INSTRUCTIONS Bolt M8 x (35 + M) Insulation sleeve Lantern base M Insulation sleeve Mounting plate Min. 3 mm Washer M8 Nut M8 All dimensions in mm Mounting plate The mounting plate for navigation lights should be at least 3 mm thick and should not exceed a parallelism of // 00,5. Fasteners • The permissible torque should be 6 Nm • Use only A4-grade stainless steel Caution! Even though the housing is made of corrosion resistant materials, galvanic corrosion may still occur. To prevent galvanic corrosion use the insulation sleeves to isolate the aluminium housing from other metal parts....

Den Haan Rotterdam Fascinatio Boulevard 1182 2909 VA Capelle a/d IJssel The Netherlands T +31 (0) 10 413 07 55 E [email protected] www.dhr.nl