CP Series
7Pages

{{requestButtons}}

Catalog excerpts

CP Series - 1

Technical Datasheet Capsule type Pressure Gauges CP Series Key Features • Nominal Diameter of 100 & 150 mm • Degree of Protection IP55 / IP67 • Stainless Steel construction as standard • Hazardous area certification • Blowout Protection • Ranges available see page 2 Series Overview Product applications The CP capsule type pressure gauges (code 3700***) are manufactured according to EN 837-3 with case and wetted parts, in stainless steel and are suitable for clean process fluid. For this reason, they are particularly suitable for installation in aggressive and corrosive environments, very common in the process industry. The optional 316 stainless steel case & ring, also make the instrument suitable for off shore installations. The sensing element is a capsule that expands under pressure, transfering the movement to the pointer trough high precision stainless steel movements. Due to the sensitivity of this type of sensing element, overpressures are not permitted. For this reason it is suggested to select the scale with the operating pressure between 1/10 to 2/3 of fsv. The CP range is suitable to meet the Burners & furnace Air & exhaust gasses treatment system Low pressure systems air & gas system The choice of models available Corrosive atmospheres Resistant to chemical attack Hazardous areas Other products Other products we can offer : • All stainless steel bourdon tube type pressure gauges • Manifolds • Diaphragm pressure gauges: Model SG How can we help you? Delta Mobrey offers fast, efficient and knowledgeable support when and where you need it. Please visit our website at www.delta-mobrey.com to find your local support centre or call us on: +44 (0) 1252 729140 Page 1 of 7 www.delta-mobrey.com Capsule type Pressure Gauge

Open the catalog to page 1
CP Series - 2

How to order Gauges can be configured by selecting codes representing the desired features from the tables that follow. The chart below, describes how the model code is built up. For assistance in configuring a switch that best suits your needs, please contact your local sales office. Pressure Units Table 3 Inner Scale Table 4 Gauge Diameter Table 5 Process Connection Table 7 Material of Gauge Case Table 8 Options Available Table 9 Treatments Available Table 10 Special Requirements NOTE: Options shaded in the following tables are the most common options and are available on the quickest...

Open the catalog to page 2
CP Series - 3

Technical Specification Enclosure casing: IP55 Protection for dry execution (optional IP67 casing not fillable, is available Pressure connection material: AISI 316 stainless steel White Aluminium with black graduation on 270 ° Aluminium pointer Pressure ranges: Pressure, vacuum and compound ranges according to EN 837-3, max pressure value 400 mbar Enclosure case and ring in AISI 304 stainless steel with bayonet bezel Optional 316 stainless steel Window material : Glass or Safety glass Process connection material: Capsule material : Internal movement material: Stainless Steel Process...

Open the catalog to page 3
CP Series - 4

Range Different units or special scales are available. Please contact our sales department for any clarification. Vacuum Gauge Gauge Pressure Ranges Compound ranges Pressure Units SCALES AVAILABLE inches H2O mBar KPa Bottom Connection, Direct Bottom Connection, Surface, Case Mounting Plate Central Back Connection, Direct Process Connection R1/4 1/2-14 NPT External G1/2B G1/4B M20 X 1.5 1/4-18 NPT External Non standard Capsule type Pressure Gauge Central Back Connection, Flush, Cover Mounting Pl

Open the catalog to page 4
CP Series - 5

Material of Gauge Case 100mm case & ring iAISI 304 stainless steel with glass window 100mm case & ring AISI 316 stainless steel with glass window 100mm case & ring AISI 304 stainless steel with laminated safety glass 100mm case & ring AISI 316 stainless steel with laminated safety glass 150mm case & ring AISI 304 stainless steel with glass window 150mm case & ring AISI 316 stainless steel with glass window 150mm case & ring AISI 304 stainless steel with laminated safety glass 150mm case & ring AISI 316 stainless steel with laminated safety glass Options Available No additional options...

Open the catalog to page 5
CP Series - 6

Bottom Connection, Surface, Case Mounting Plate Weight No-fill Central Rear Connection, Direct Central Rear Connection, Flush, Cover Mounting Plate Capsule type Pressure Gauge Hole Ø at 120° Lower Back Connection, Flush, Cover Mounting Plate F

Open the catalog to page 6
CP Series - 7

Approvals EUROPEAN DIRECTIVE Pressure Equipment Directive (PED) 2014/68/EU Compliant to PED, Module A for static Pressure > 200 Bar, SEP for Static Pressure ≤200bar ATEX Directive 2014/34/EU CONSTRUCTION SAFETY— Technical file storage reference SGS21ATEX0095DR Notified body for Technical storage file : SGS Fimko Oy, Helsinki, Finland, Notified Body No 0598 Pressure Equipment (Safety) Regulation 2016 S.I. 2016 no. 1105, as amended, Module A for static Pressure > 200 Bar, SEP for Static Pressure ≤200bar Equipment and Protective Systems Intended for use in Potentially Explosive Atmospheres...

Open the catalog to page 7

All Delta -Mobrey catalogs and brochures

  1. SG Series

    7 Pages