
This document appears to be a technical or product information sheet related to turnbuckles provided by DCL-USA, a company specializing in deck and dock hardware.
The document references "Turnbuckles," which are hardware components used for tensioning and adjusting the length or tension of cables, ropes, or tie rods, commonly used in deck and dock construction or maintenance.
The provided excerpt does not include detailed specifications, procedures, standards, or recommendations related to the turnbuckles. There are no tables, diagrams, or technical parameters included in the text.
This document serves primarily as a contact and product identification reference for turnbuckles offered by DCL-USA. For detailed technical specifications, installation procedures, or standards, additional documentation would be required.
CAUTION: NEVER EXCEED THE WORKING LOAD LIMIT Ratings arc stated in short tons (2.000 lbs.) or pounds. All dimensions are in inches and pounds unless otherw ise indicated Approximate dimensions shown Contact us for specific dimensions, as they may differ between manufacturers According to ASTM F 1145. Hot galvanized, drop forged, bodies normalized, end fittings quenched and tempered. Approximate Weight Each Hook & Hook Working Load Limit Hook & Hook Hooks not available on sizes larger than Jaw ends up to 5/8" are fitted with bolt & nut; jaw ends 3/4" and up are fitted with pin and cotter key. Length with www.dcl-usa.com • email: [email protected] • Fax (504) 947-8557 • 1-800-228-7660
Open the catalog to page 11 Page
1 Page
1 Page
3 Pages
1 Page
1 Page
1 Page
1 Page
1 Page
1 Page
1 Page
1 Page
350 Pages
1 Page
1 Page
1 Page
1 Page