Shur-Loc Hooks Crosby® SHUR-LOC®Hooks • Forged Alloy Steel - Quenched and Tempered. • Individually Proof Tested at 2-1/2 times the Working Load Limit with certification. • Recessed trigger design is flush with the hook body, protecting the trigger from potential damage. • Easy to operate with enlarged thumb access. Positive Lock Latch is Self-Locking when hook is loaded. Rated for both Wire Rope and Grade 8 Chain. G-414 Heavy Thimble should be used with wire rope slings. Trigger repair Kit available (S-4316). Consists of spring, roll pin and trigger. S-3326 Swivel Hook utilizes anti-friction bearing design which allows hook to rotate freely under load. Fatigue rated. The SHUR-LOC® hook, if properly installed and locked, can be used for personnel lifting applications and meets the intent of OSHA Rule 1926.550 (g) (4) (iv) (B). "Look for the color Gold - Crosby Alloy Hooks". U.S. Patent 5,381,650 and foreign equivalents. Use in corrosive environment requires shank and nut inspection in accordance with ASME B30.10-1.2.1(b)(2)(c)2000. S-326A SHUR-LOC® Swivel Hooks • Suitable for infrequent, non-continuous rotation under load. Chain Size * Ultimate Load is 4 times the Working Load Limit based on Grade 8 Chain. S-3326 SHUR-LOC® Swivel Hooks with Bearing • Suitable for frequent rotation under load. Chain Size Dimensions (in.) Weight Each (lbs.) 1.50 3.10 5.26 11.22 17.32 * Ultimate Load is 4 times the Working Load Limit based on Grade 8 Chain. Copyright © 2008 The Crosby Group, Inc. All Rights Reserved www. dcl-usa.com • email: [email protected] • Fax (504) 947-8557 • 1-800-228-7660