Life­ aft lighting Systems r RL6 System Our mission is to achieve World class performance through partnerships with our suppliers, customers and employees, providing products and services that enhance the safety and security of our customers. Daniamant products cover five key areas: • Lifejacket Lights • Liferaft Lights • Lifebuoy Lights • Intrinsically Safe Lights • Special Lights Further Information The Technical Data Sheet, Installation & O ­ perating Instructions & Product Safety Data Sheet (PSDS) can all be found on our web site. This information was correct at time of going to press, please check our web site for any updates. Daniamant operates a policy of continuous improvement and reserves the right to amend the specifications in accordance with that philosophy. RL6 The RL6 features the very latest LED technology to enhance per­ formance and reduce costs. The RL6 comprises of just two items. 1) The External Light and Lead 2) The Internal Light and Battery The Internal Light and Battery also powers the external light, a key part of increasing reliability and reducing costs. The two units are connected by a polarised sealed plug, for ease of service and replacement. The performance of course meets IMO SOLAS standards, is fully MED approved and also approved by the USCG. External light and lead The External Light is a flashing LED Light, offering advances in r ­ eliability and performance. The single LED light is mounted in a way to ensure a minimum light output of 4.3cd. It is connected via a 65 cm lead to the internally mounted Interior Light and battery. This lead length can be varied subject to quantities required. Internal light and battery The sealed Interior Light is combined with the battery that powers the complete RL6 system. The RL6 is switched and controlled from this unit. Pulling the styled pull tag operates both the Interior and Exterior Lights. The interior light is a steady light. Both the internal and external lights can be separately switched to conserve battery power if required. Daniamant design and manufacture all of our products in line with the Quality Management System (ISO), relevant worldwide approvals, ­ echnical t specifications, current legislation and International directives. The RL6 is dated for 5 years from the date of manufacture and both the internal and external lights are replaced at the same time.