1. Catalogs
  2. Daniamant
  3. LIFEJACKET LIGHTS II
video corpo

LIFEJACKET LIGHTS II

LIFEJACKET LIGHTS II

LIFEJACKET LIGHTS II

Product catalog summary
Overview: Daniamant offers a range of lifejacket lights that comply with the latest IMO SOLAS standards. These lights are designed for easy attachment and use in various marine safety applications.
Specifications:
  • All lights meet IMO SOLAS standards and are MED approved.
  • Minimum light output of 0.75 candela (cd) and a duration of at least 8 hours.
  • Five-year life span for most models.
Product Descriptions:
  • Rescue-Dan M1: A manually activated, compact flashing unit with easy fitting options for different strap sizes. It can be retrofitted on jackets not prepared for light attachment.
  • Rescue-Dan W1: An automatic version that activates in water and remains active even if positioned above water. It shares the same attachment system as the M1.
  • Rescue-Dan WR: An automatic recess version designed to be embedded in a lifejacket, with only the dome visible.
  • Rescue-Dan MR: A recess version for passenger vessel lifejackets, designed for mass evacuation systems.
  • L7A: Designed for inherently buoyant life jackets, featuring a housing assembly permanently mounted into the foam material. The light and battery unit is replaceable after five years.
  • L6A: An automatically activated light with a lead for water activation and manual deactivation if needed.
  • L6: A manually activated, compact light operated by a pull ring, suitable for use in adverse conditions.
  • LJ2: A rugged light with a minimum output exceeding 0.75 cd, featuring a 'press to test' facility and a sealed battery unit for a five-year storage life.
Additional Information: Daniamant also provides liferaft lights, lifebuoy lights, and custom solutions. Further technical details and approvals are available on their website.
See more

Catalog excerpts

LIFEJACKET LIGHTS II-1

Five year life The light is a single compact flashing unit. It is manually activated by rotation of the light dome. Easily fitted with two different backing plates, one to go over a thin strap and one to go over a 5cm belt, the sleeves allow straps to go through for prepared for light attachment. Lights can also be supplied with a pull ring Rescue-Dan M. This light has a special fitting/clip design for attachment to a lifejacket so that only the dome is above the fabric on the jacket. The light is specially designed for lifejackets used on passenger vessels with excavation or chute systems for mass evacuation of passengers. This is the automatic version of activates automatically when in water and stays activated even if jacket above the water. attachment arrangement With a special fitting lifejacket with only the dome appearing above the fabric on

 Open the catalog to page 1
LIFEJACKET LIGHTS II-2

Lifejacket Lights offer: • A full range to suit light duration and robust flashing Life Jacket light fully meeting the latest stringent IMO SOLAS requirements. one piece light. It is operated by a simple pull ring that is easy to use even with gloved hands or in adverse conditions. The L6A is very similar to the manual activated light. It uses a lead to ensure the light comes on in the water and that lead allows the light Both types utilise the latest electronic circuitry that ensures the light flashes at between 50 - 70 times per minute. Both types are supplied with a unique mounting clip to...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.