DASH PA® HvCls W S fSr^ ssrw. Marine Ceiling Systems Technical Information Design Integrated DAMPA DCC 300 Light Fittings

Design Integrated DAMPA DCC 300 Light Fittings Cost Saving Integration The DAMPA DCC 300 Light Fittings are designed to integrate both aesthetically and functionally with the DAMPA DCC 300 Ceiling System - providing all support needed. Main Features DAMPA DCC 300 Light Fittings offer the following main features and advantages: • Fulfil B-0 classification without additional insulation. • Low building/installation height. • Fast and easy installation. • Reduced total installation costs. Pre-positioned DAMPA Light Fittings can be included in the pre-cut ceiling supply, hereby saving both time, materials...

Standard Attachments DAMPA Light Fittings are supplied complete with frames and mounting brackets. Light sources are not included. Standard Weight The weight of the complete light fitting is as follows: 2x11 W = 4.5 kg 1x60 W 3.4 kg = 2x18 W 5.9 kg = 2x36 W = 10.2 kg Electrical Specification IP 20: Protection class, standard IP 44: Diffuser closed with silicone Voltage/Frequency: 220 V/60 Hz, 230 V/50 Hz. Power factor corrected. (Other voltages and frequencies on request) Execution: CE-marking according to European Standard EN 60598 and rules of relevant classification societies. Flexible internal...

Intensity Distribution Diffusers for Light Fittings Standard No. 1 Opal Open Cube Louvre No. 6 Clear Prismatic Acrylic Sheet 10050 CD ° lu men DCCA 2x18 W direct downwards with opal open cube louvre. Light output ratio: 59% Distribution curve No.: i9401181.sb DCCA 2 x 18 W direct downwards with clear prismatic acrylic sheet. Light output ratio: 53% Distribution curve No.: i9401182.sb No. 2 Silver Low Luminous Louvre No. 8 Opal Polycarbonate Sheet Following spare parts are available: 1. 2. 3. 4. 5. Capacitor Starter Ballast Unit Lamp holder Lamp holder with starter socket No. 11 Red Acrylic Sheet...