Dampa 10/200/300
5Pages

MARINE CEILING SYSTEMS DAMPA® 10/100/200/300 Linear design with decorative panels

Product description DAMPA® 10/100/200/300 Aluminium panels for public areas FORM FOLLOWS FUNCTION WITH INTEGRATION GOOD ACOUSTICS IMPROVE INDOOR CLIMATE Enjoy the possibility of integrating elements such as light fittings into the DAMPA® metal ceilings. Some elements are offered by DAMPA, others are developed and designed by others, to fit into our ceiling systems. DAMPA metal ceilings ensure an exceptional acoustic environment on board. The combination of perforation, acoustic felt and insulation will absorb noise and add to a good environment. A ceiling where elements such as light...

DAMPA® 10 panels are produced in aluminium and is specially suited for public areas. Special for DAMPA® 10 panels is the characteristic oblique edge, which enhances the closed groove between each panel. The panel joints form a 20 mm closed groove, which is repeated at all perimeters for building tolerances. Concealed suspension system. DAMPA 200/300 Type N Perforated with 1.0 mm holes at 2 mm centres, open area 22%. Perforated with 1.0 mm holes at 2 mm centres, open area 22%. With acoustic felt bonded to the concealed surface using non-toxic waterproof glue. With black acoustic felt bonded...

DAMPA 10/100/200/300 ceiling units can all be installed in any combination on the same Modular Carrier No. 40 Closed joints are formed under Modular Carrier No. 43 ( double carrier) rigidly suspended from the deckhead above. For DAMPA 10 use the longer reverse clips and for DAMPA 100/200/300 use the shorter of the two. Locate the carrier ends so that the cutouts overlap and lock together by folding the lugs inwards. Closed Jointing Details If necessary, the ceiling units can be locked in position by pushing down the reverse clip behind the wide flange. Modular Carrier No. 40 is provided...

Height: 26 mm Width: 52 mm Length: 4000 mm Weight: 0.43 kg/lin.m Material: 0.6 mm galvanised steel Height: 26 mm Width: 124 mm Length: 4000 mm Weight : 0.83 kg/lin.m Material: 0.6 mm galvanised steel Module 100 for curved configurations Height: 5.5 mm Width: 52 mmm Lenght: 4000 mm Weight: 0.22 kg/lin Material: 0.6 mm galvanised steel Height: 38 mm Width: 80 mm Length: 4000 mm Weight: 0.92 kg/lin.m Material: 1.0 mm galvanised steel, stove-enamelled black or white Height: 38 mm Width: 80 mm Length: 4000 mm Weight: 0.92 kg/lin.m Material: 1.0 mm galvanised steel, stove-enamelled black or white...