Ski Literature Rev C
Ski Literature Rev C
The document provides detailed specifications for slalom skis, including size, length, depth, and measurements from the tail at speeds of 34 mph and 36 mph. The binding measurements are also provided for various ski sizes ranging from 62" to 69.5".
Specific fin settings are recommended for different slalom ski models such as Fusion, Z7 ST, X7, Nomad RC, and others. These settings include measurements for length, depth, and angles at different speeds.
Guidelines for ski preparation include cleaning the ski bottom with a mild cleaner and sponge for smoother performance. It is noted that a mold release is used in production, and final adjustments can be made to suit personal style and preference.
Fins are initially set to factory specifications, but final adjustments need to be made by tightening the allen screws to lock the settings. Measurements should be re-checked after adjustments to ensure accuracy.
Instructions are provided for measuring ski binding placement from the back of the heel rubber on the front boot to the tail of the ski. The document emphasizes ensuring all screws are snug against the fin blade.
Contact details for D3 Custom Skis are provided, including phone number, email, and website for further assistance and photos of measurements.
Catalog excerpts
Slalom Ski Factory Recommended Fin Settings Recommended settings for Fusion, Fusion GS, Z7 ST & Z7 ST Diamond Slalom Needle Flat Wing at Wing at Length Depth From Tail From Tail 34 mph 36 mph Recommended settings forX7, X7 Pearl and X3 Slalom From Tail From Tail Recommended settings forZ7 & Z7 Diamond Slalom Needle Flat Wing at Wing at Size Length Depth From Tail From Tail 34 mph 36 mph Binding Recommended settings for Nomad RCX Slalom Needle Flat Wing at Wing at Size_Length_Depth_From Tail_From Tail_34 mph_36 mph_Binding Recommended settings for Nomad RC Slalom Needle Flat Wing at Wing at Size_Length_Depth_From Tail_From Tail_34 mph_36 mph_Binding Recommended settings forX5 Pro, Pro Rose & CX Slaloms Needle Flat
Open the catalog to page 1
Size_Length_Depth_From Tail_From Tail_34 mph_36 mph_Binding Speed and line length can affect settings Measurements are from the back of the heel rubber on front boot to tail of ski Factory fin set-up will be within .010 of recommended settings. Final adjustments may be made to accomodate personal style and preference. Fins are set to factory spec's but the three point alien screws have not been adjusted to the final locked position. To lock your final settings in place slowly tighten (with the fin blade tight in the box) the two alien screws on top of the box and the rear alien adjustment screw...
Open the catalog to page 2