QUALITY WITH SIMPLE CONNECT & FORGET CHARGING SMARTPASS is an energy management unit which controls and optimises energy produced by alternators, solar cells, wind power or conventional AC/DC chargers. It distributes the power to the bat- tery banks or consumers which require energy, such as the deep cy- cle bank, bowthruster batteries, consumers, etc. Used together with a D250S DUAL, SMARTPASS provides optimal charging via CTEK's unique staged charging cycle, which also protects your batteries. SMARTPASS also has an integrated battery guard which protects deep cycle batteries from harmful total discharge and ensures that critical equipment such as radio, emergency lights and navigation systems always function. SMARTPASS has a temperature sensor which protects batteries against high temperatures. SMARTPASS is a fully automatic energy management system which can handle up to 80 A for batteries between 28-800 Ah. The en- ergy management system is IP65 classified (water jet and dust pro- tected and approved for outdoor use). Suitable for all types of 1 2 V lead-acid batteries. TECHNICAL DATA CHARGING CURRENT BATTERY CAPACITY P65 (splash and dust proof) Fully automatic for optimal charging THE SMARTEST BATTERY CHARGERS IN THE WORLD

CTEK SMARTPASS • Battery separation eliminates diodes and VSR relays • Charging of service batteries up to 100 A, reducing recharge time • Separation of energy-consuming equipment and service batteries dur- ing charging increasing the expected life of 1 2 V devices such as light bulbs, LEDs and other electronics. Allows the battery to be charged from the alternator at a level that minimises recharge time [patent • Temperature protection of services batteries reduces charge current at high temperatures [patent pending] • Maximised battery life as a result of reduced incidences where the • Reduced...