Catalogs >
Cristec >
YPOWER CHARGERS WITH RELAYS OR CAN-BUS BOARD

YPOWER CHARGERS WITH RELAYS OR CAN-BUS BOARD
1Pages

Catalog excerpts

YPOWER CHARGERS WITH RELAYS OR CAN-BUS BOARD - 1

CRISTEC on-board energy YPOWER CHARGERS ^WITH RELAYS OR CAN-BUS BOARD The very popular YPOWER chargars11’ are now available with factory integrated aptians: relays board or CAN-BUS board. 111 Please refer to dedicated datasheet for complete characteristics. The relays board allowstwo alarmsto be transmitted through dry contacts (NO and NC): Low battery voltage and charger fault. Alarm Ldw Battery voltage is triggered if the voltage of the battery bank is less than: - 10.2V forIZV models Alarm Charger Fault is triggered if : - Charger fails - Output fuse has blown - Charger voltage is less than : CAN-BUS interface board allows the charger to communicate with a monitoring system orany other peripheral device using this mode of communication. Protocol can be made-to-measure on request.13 (2) Please consult us. Available data are : - AC input voltage andfrequency - Battery voltage (up to 3 banks) - Charger current - Charger status (Boost, Absorption, etc.] - Battery temperature We reserve the right to make modifications to the specification without prior notice. Please consult us. F-YPO-OPTIONS-00-A Charger with relays board Charger with CAN-BUS board Part number (3) Part number (3) S.A.S. Cristec Industries 31 rue Marcel Paul - Z.I. Kerdroniou Est - 29000 Quimper - FRANCE Tel. +33 (0)2 98 53 80 82 - Fax +33 (0)2 98 55 64 94 - e-mail : info@cristec.fr

Open the catalog to page 1