solo inverters overload capacity for starting surges. efficiency- stand-by consumption. Low • High reliability, limited size and weight. • use integrated protection. F • Battery protection with stop on low voltage. • Silent and comfort. • igh H Range possibilities • Incoming power : voltage 12, 24 or 48VDC. • Output : voltage 230VAC - single phase - 50Hz, power from 200VA to 3500VA. On request : 115VAC - 50Hz/60Hz or 230VAC - 60Hz. General specifications Presentation The aim of the inverters is to convert batteries direct voltage into 230VAC/50Hz alternating current. The SOLO digital sinewave has reduced the number of components and increased the equipment reliability. Use The SOLO inverters deliver a sinusoidal wave identical to mains supply. Their physical characteristics enable a wide scope of applications : marine, mobile, renewable energy, industry, etc. • Data processing : vehicule equipped with computing equipment, on-board computer, automatic systems, etc. • Télécommunications : radio communication relay, on-board telephony, radio stations and beacons, radionavigation, etc. • Lighting : security lighting, incandescent and fluorescent lighting, etc. • Domestic and industrial equipment : domestic appliances, television, portable tools, refrigerators, micro-waves, etc. • Incoming power : voltage 12, 24 or 48VDC (-12 % +30 %), reduced consumption off load. • Output : 230VAC single phase +/- 5 %, frequency 50Hz +/- 0,05 %, sinewave - distortion ≤ 3 %, power factor - inductive and capacitive, instantaneous power from 1,5 to 3,5 rated power according to model. • Common characteristics : galvanic isolation input output ≥ 2 MΩ, electric rigidity 2 U+1000, conditions for standard functioning : • temperature from - 20 to + 50 °C, • humidity from 0 to 95 % without condensation, • acoustic noise ≤ 45 db. • hysical characteristics : P features : standart IP 20 metal grey box, IP30 for models ≤ 800 W. Connection of cables by means of terminal block through a cable gland, depending on model. • EC conformity : EN 50081 I/II • EN 50014 •

solo inverters Sinewave ntee • rA STANDARD RANGE Input : 12, 24 or 48VDC Output : 230VAC, single phase, 50Hz Sinusoidal signal - Wall mounted box part number input voltage constant power maximum power Instantaneous Efficiency power (5s) The characteristics given in this sales brochure do not have contractual force and CRISTEC reserves the right to modify the product technical characteristics without prior notice. Please consult us before any technical integration. S.A.S. Cristec Industries 31 rue Marcel Paul - Z.I. Kerdroniou Est - 29000 Quimper - FRANCE Tel. +33 (0)2 98 53 80 82 - Fax +33 (0)2...