COLD FOOD COUNTERS COLD FOOD COUNTERS MIL SPEC MIL SPEC MIL SPEC MIL SPEC MIL SPEC CABINET CONSTRUCTION The combination of full perimeter counter access with optional upper display and base refrigerated storage, makes for a fine working arrangement. Each unit has the capability of opening with or without the cold well. CABINET CONSTRUCTION Exterior and interior of all standard cabinets, including front, sides, doors and louvered grill are constructed of heavy gauge, type 304 stainless steel. Special attention was taken in engineering the doors of the Cospolich cabinet. The door unit was designed to withstand the continuous use and abuse that is common in all food service applications. Resilient vinyl gaskets, which are pre-formed in frames with welded corners, greatly inhibit bacterial growth and are easily replaceable. CFC6T-2M-S (SN) SHELVING Standard interior shelving consists of heavy-duty epoxy-coated steel wire with front rail. Each shelf is adjustable in one-inch increments. Stainless steel shelving and brackets are also available. Heaters, which are concealed under the thermal breaker strip around the door perimeter, prevent condensation. Interior lighting, a standard item in all refrigerator compartments, is activated by the door opening. U.L. and U.S.P.H The equipment is listed by Underwriter’s Laboratories, Inc. for safety and sanitation and is built according to standards as set forth by the U.S. Public Health Services. HARDWARE Positive latches with magnetic back-up are included on all standard cabinets to assure positive latching and sealing. Incorporated into the latch is a replaceable, keyed cylinder lock. THIS UNIT AVAILABLE IN OUR SPECIAL MODULAR CONSTRUCTION Heavy duty, adjustable, chrome plated hinges are provided on all standard cabinets. Also available, at no extra cost, are 180 degrees self-closing, cam-lift hinges with stay-open feature at 93 degrees. Cabinet body and doors are insulated with foamed-in-place polyurethane foam, providing for excellent rigidity and the best insulating properties in the industry. REFRIGERATION SYSTEM All components of the refrigeration system, with the exception of the evaporator, are bottom mounted on a heavy duty base frame behind a louvered grill which is easily removable without the use of tools. The condensing unit is mounted on a slide out rail for ease in cleaning and servicing. All evaporator coils are copper tube, and all AC voltage models have forced-air ventilation. The refrigerant flow is monitored by an expansion valve for effective cooling and quick recovery times. Temperature of the cabinet is factory adjusted, and the controls, along with an on/off switch are located in the condensing unit area. The cold well, which has seperate controls, can be opearted independently of the base storage refrigerator. OPTIONS ●Upper display FEATURES ● Sneeze Shield ● Stainless steel interior and ● Tray slides (folding or fixed) exterior (exposed) ● Oversized refrigeration system ● Special dimensions ● Stainless Steel adjustable ● Anti-condensate door heaters shelving with front rails ● Heavy-duty chrome-plated ● Mil-Spec units hardware ● Heavy-duty adjustable legs ● Automatic activated interior ● Food Files lighting ● Door with adjustable alignment ● Aluminum construction for weight sensitive applications ● Epoxy coated adjustable ● Fresh and sea water cooled shelving with front rails condensing units ● Removable grill ● Special voltage and currents ● Polyurethane insulation ● Slide-out condensing unit ● Resilient gaskets ● Exterior LED thermometer ● Condensate Evaporator Pan CONTACT FACTORY FOR YOUR SPECIFIC CAPACITY REQUIREMENTS

DIMENSIONAL DATA Depth Over Body (in / mm) OA Depth with Door Open 90° ( in / mm) Clear Door Width (in / mm) Clear Full Door Height (in / mm) Shelf Area (sq ft / sq m.) Weight (lbs / kg) ELECTRICAL DATA REFRIGERATION DATA Compressor H.P. BTU / HR - KCAL / HR at 90 SHIPPING DATA Naval Shipboard Models Available Model Shown CFC4T-2M-S (SN) Naval Shipboard Models Available