CORMASTER KEVLAR AEROSPACE N636 WEIGHT SAVING MATERIAL FOR AERONAUTICAL APPLICATIONS ADVANTAGES Superior compressive properties, 20% higher than nomex® honeycombs Extremely high shear moduli, from 1,5 to 3 times increase Low moisture absorption Excellent fatigue properties High hot / wet characteristics DELIVERY TIME Kevlar honeycomb is available from Corex Honeycomb stock, ensuring short lead times. Delivery time on request. MATERIAL Non metallic structures made from KEVLAR® N363 para-aramid paper sheets (manufactured by Dupont ) Bonded together and coated with a phenolic resin. APPLICATION Please get in touch to discuss your requirements and to find out more about Cormaster Kevlar. Email: [email protected] Call Sales Support on: +44(0) 1480 415053 corex-honeycomb.com Ideal use in the aeronautical applications where weight savings are permanent requirements Excellent strength and stiffness allows use of lower density cores in the structural sandwich applications

TECHNICAL DATA CORMASTER KEVLAR AROSPACE N636 bare N636 weight conpressive osy strength (MPa) Honeycomb density: the allowable tolerance is +/- 10 % from the nominal density. Exceptions to this are 3.2-29, 4.8-29 OX and 6.4-24, which have a tolerance of +/- 13 % of the density. These mechanical properties are only representative. Please note, that it is important to consider the different properties for L- and W-Shear and confirm the Cormaster type to enable us to provide a quotation. N636 - 3,2 meta-aramid C1 paper sheets coated with resin KEY: osy = ounce per square yard (1 osy = 33,91 gr/m2...