Marine lighting Pauluhn™ Meridian FCM fluorescent luminaire Pauluhn™ Meridian FCM Engineered for marine interior applications Pauluhn Meridian FCM luminaires are designed for a variety of uses for marine interiors, including passageways and corridors. Surface mount cornice applications and under cabinet mounting Marine interiors, including corridors, passageways and stairwells Multi-voltage electronic ballast resistant to brownouts or voltage and frequency fluctuations Wraparound lens design provides the proper balance of side and direct lighting Filter tube options allow colored lamps to operate on a separate circuit for darken ship mode UL1598A Luminaires for Marine Vessels UL924 Emergency Lighting Equipment Available with toggle switch and convenience outlet Marine Inside Drip Proof Type Tool-less entry for easy relamping Optional self-contained emergency battery back-up ballasts with test switch Optional long life T5 lamps available upon request (consult factory) Materials: Housing and reflector: • Type 5052H32 aluminum with white polyester powder coat Lens: DR acrylic, translucent white Lamp wattage Ballast/socket type ANSI lamp code Starting temp. Supply wire Entries: (2) ½” and (2) ¼”NPT knockouts on the housing; (1) NPT knockout on each end Lamp holder: Polycarbonate Technical specifications: Terminal block: • 2-pole Ballast: 120-277V 50/60 Hz and electronic, except F20 and F40 T12 bi-pin which are 120V 60 Hz Emergency battery back-up ballast: • Optional, self-contained 90 minute minimum for all lamp types. 120 minute minimum for F32T8 one lamp. Starting temperature 32ºF/0ºC. Convenience outlet Optional 125V 3-wire, 2-pole U-ground (inside type only) Switch Optional double pole toggle switch

Ordering information Nominal length Lamp type No. of lamps/ nominal lamp wattage Nominal length Lamp type No. of lamps/ nominal lamp wattage Emergency battery back-up ballast, 1 lamp, 277V max., test switch Emergency battery back-up ballast, high lumen, 1 lamp, 277V max., test switch Lamps Long life lamps (F54T5HO only) Double pole toggle switch Convenience outlet (not for drip proof areas) 220V 60 Hz (T12 bi-pin only) 277V 60 Hz (T12 bi-pin only) Dimming ballast (not available for F20T12) *For T5 and T5HO, EM ballast is fixed voltage, 120 or 277V, 50/60 Hz. **Lamps are not included unless option...