*mynauticexpo

LED N2LPS Sell Sheet

Product catalog summary

Overview: The LED N2LPS LIGHT-PAK™ is an emergency lighting system designed for egress and emergency illumination in demanding environments. It is the first LED luminaire specifically created for such purposes.

Applications: This system is used to provide reliable illumination during power failures, illuminate machinery during AC power loss, and in areas with potential exposure to flammable gases or vapors. It is suitable for manufacturing plants, refineries, chemical plants, and other industrial facilities subject to wet or corrosive conditions. It is also applicable in outdoor settings and where required by safety codes.

Certifications and Compliances: The system complies with NEC/CEC Class I, Division 2, Groups B, C, D, Class I, Zone 2, UL Standards (UL1598A, UL924, UL844), CSA standards, and the Life Safety Code NFPA101® for emergency lighting. It is suitable for marine wet locations, Type 4X.

Features and Benefits: The luminaire is compact and factory-assembled with LED lamps for improved performance. It has a non-metallic, enclosed, and gasketed housing for corrosion protection, durable marine-rated LED lamp heads, and a high-temperature rated nickel-cadmium battery. It includes a solid-state battery charger, a factory-installed "push-to-test" button, self-test, monitoring, and diagnostics features, and remote luminaire head assemblies. A stainless steel drain and a standard battery disconnect switch are also included.

Temperature Performance: The system is rated for operation in ambient temperatures from 0ºC to 55ºC. Operating outside this range may affect battery life and charging performance.

Standard Materials: The power supply and remote luminaire enclosure are made of Krydon® fiberglass-reinforced polyester, the LED lamp head assembly is epoxy powder-coated stainless steel, and the exterior hardware is nylon, plastic-coated, and stainless steel. The cover gasket is made of Hypalon® synthetic rubber.

Electrical Ratings: The power supply input is 120, 230, or 277 VAC, 50 or 60 Hz, with a maximum of 28 watts. The output is 12 VDC. Luminaire heads operate at 12 VDC with a 3-watt LED lamp providing 80 lumens.

Unit Net Weights: The weights of various models range from 8 lbs to 16 lbs, depending on the configuration.

Ordering Information: Various configurations are available, including models with and without luminaire heads, and remote luminaire assemblies with one or two LED lamp heads. Note that some models are UL Listed only and not cUL approved.

Catalog excerpts

Emergency Lighting System The industry's first LED luminaire designed specifically for egress and emergency illumination for the most demanding environments. COOPER Crouse-Hinds

Open the catalog to page 1

LED N2LPS LIGHT-PAK ™ APPLICATIONS CERTIFICATIONS AND COMPLIANCES ™ LED N2LPS LIGHT-PAK Emergency Lighting Systems are used: • To provide reliable illumination for egress areas during failure or interruption of power to the normal lighting system • To illuminate machinery or panels during a loss of AC power • In areas where flammable gases or vapors may become present due to abnormal, unusual, or accidental conditions • In manufacturing plants, refineries, petrochemical and chemical plants, waste and sewage treatment facilities, oil terminals, food processing facilities, breweries, and other...

Open the catalog to page 2

LED N2LPS Sell Sheet

LED N2LPS Sell Sheet

Catalog excerpts

All Cooper Crouse-Hinds Pauluhn catalogs and brochures