Emergency Lighting System For Hazardous Areas COOPER Crouse-Hinds

ELPS LIGHT-PAK TM Emergency Lighting System For Hazardous Areas † Class I, Groups B, C, D Class II, Groups E, F, G Class III, NEMA 3R, 4X, 12 * Suitable for wet locations *NEMA 4X pending with new ECD 4X breather and drain. Aimable and lockable—no set screws. Wrench tight unions allow positive xture positioning. A NEW FAMILY OF EMERGENCY LIGHTING The Light-Pak emergency lighting system from Cooper Crouse-Hinds® is the only hazardous area system with lighting xtures designed specically for emergency lighting. The aimable, lockable, light-directing, tungsten halogen xtures enable you to put emergency...

FEATURES BENEFITS • Explosionproof emergency light providing 90 minutes of continuous light • Self calibrating—self calibrates after initial charge • Automatic condence test every month • Automatic battery capacity check every 6 months • Visual status indication of the Light-Pak is readily available through LED indication • Between lamp head and power supply there is a factory installed seal • The only Division 1 emergency light with adjustable lamp heads that cast light down long hallways or corridors • Meets all National Fire Protection Agency requirements for the Life Safety Code and combined...

ELPS LIGHT-PAK TM Emergency Lighting System For Hazardous Areas DIMENSIONS (INCHES) SUGGESTED SPECIFICATION 33.00 EXS/EXD 35.63 EXD GB General The emergency lighting system shall be explosionproof and dust-ignitionproof, UL Listed (UL844) for Class I, Groups B, C, D; Class II, Groups E, F, G; and Class III. Power supply also shall be UL Listed as “Emergency Lighting and Power Equipment” (UL924). System shall be rated 120, 220, 240, 277 VAC; with a 12 VDC output supply to the lamps. Unit shall be furnished with a push-to-test switch and AC monitor pilot light as standard; and optional integral...