Boat Trailers
5Pages

{{requestButtons}}

Catalog excerpts

Boat Trailers - 2

A rock-solid combination Conver offers you a choice of trailers for low-speed and high-speed uses. There are special trailers for transporting, launching and landing mowing boats. Of course, these The trailer frame is fitted with fixed rollers. As a result of their large diameter the roll- trailers are also of the same quality that you are used to with Conver. The base is con- ers are not only very strong, but the boat can also roll on them very easily. The trailers structed around a solid chassis, which ensures stable road holding and a long service are fitted with a solid side-frame on...

Open the catalog to page 2
Boat Trailers - 3

Greater satisfaction at work The perfect trailer for high-speed towing The trailer can be fitted with a range of different winch types. The trailer is fitted with In addition to trailers for low-speed towing, Conver also has boat trailers that are a mechanically-operated hydraulic cable winch in the base section. Alternatively, the suitable for use on the road. Both types of trailers satisfy European standards for road trailer can be fitted with a strap winch. This gives you the option of working with a traffic. The high-speed trailers are also RDW-approved and can therefore also be leader,...

Open the catalog to page 3
Boat Trailers - 4

CONVER CTP485 BOAT TRAILER SPECIFICATIONS Overall length Transport width 2.55m or 2.75m with wide tyres Approximately 1,350kg for the base model Ground clearance 315-410mm depending on the tyres and choice of axle Tractor requirements 12V 7-pole (ISO1724), 12V 2-pole (DIN ISO 4165) or 12V (DIN 9682) 2x ½” hydraulic connectors (ISO 7241-1 A) with a minimum 20l/min at 140 bar Maximum loading/unloading gradient Base model includes DIN towing eye Ø 40mm, fixed Heavy steel nose wheel, which can be adjusted and raised Colour RAL7012 grey Hydraulic winch, 3.6 tonne, hydraulic on a tractor, manual...

Open the catalog to page 4
Boat Trailers - 5

CTP420HS HIGH-SPEED SPECIFICATIONS Overall length/height Transport width Maximum loading capacity Towing vehicle requirements Maximum loading/unloading gradient Base model includes Galvanised bent frame Tandem axle with torsion axle and mudguards Tyre size 205/14 8ply Hand winch for winching the boat on and off, maximum load 1,180kg Overrun brake, mechanical with parking brake Adjustable nose wheel that can be raised Integrated lashing eyes Lighting and markings according to traffic regulations Heavy end rollers and ball-mounted side guides Options Electric winch, 3.6 tonnes with cable...

Open the catalog to page 5

All Conver catalogs and brochures

  1. C485

    7 Pages