OPSIS M800

OPSIS M800

OPSIS M800

Product catalog summary
Introduction
The OPSIS M800 System by Consilium Marine AB is a DNV certified scrubber exhaust monitoring system designed for continuous emission monitoring using a non-contact optical method. It measures various gases such as NO, NO2, SO2, CO2, CO, NH3, and CH4 with a single analyzer, minimizing maintenance requirements.

Regulatory Compliance
The system addresses upcoming International Maritime Organization (IMO) regulations aimed at reducing ship emissions. Ships in Environmental Control Areas (ECA) must use low sulfur fuel or install scrubbers to reduce SO2 emissions. The OPSIS M800 System is recommended for monitoring SO2 and CO2 emissions from scrubbers.

Technical Specifications
The OPSIS M800 employs a cross-stack, non-contact optical measurement path, eliminating the need for gas sampling. It uses UV/IR DOAS (Differential Optical Absorption Spectroscopy) for accurate and fast measurements. The system supports multiple gas types and can be updated via software for additional gases. It also offers optional monitoring of Particulate Matter (PM) and opacity.

Cost Efficiency
With the ability to connect one analyzer to multiple paths using an optical multiplexer, the OPSIS M800 is cost-effective for up to 12 measuring points. This multipath capability allows a single analyzer to monitor all scrubber systems on a ship, reducing investment costs.

Data Management and Connectivity
The system features comprehensive data management, including automatic data backup, transfer to FTP sites, and remote access via the Internet. It supports Modbus connectivity and offers a web interface for real-time and historical data access.

Advantages
The OPSIS M800 System offers several advantages, including no sampling requirement, low maintenance, international certification, and low life cycle costs. It provides fast response times, reliable operation, and a customized reporting system.

Global Presence
Consilium Marine AB has a worldwide presence with offices and sales representatives in major cities, ensuring support and service availability globally.
See more

Catalog excerpts

OPSIS M800-1

Photo by Sylvie Fraser When Safety Matters OPSIS M800 Continuous emission monitoring Optical non-contact monitoring for all relevant gases

 Open the catalog to page 1
OPSIS M800-2

Consilium Marine AB AB SAFETY AB CONSILIUM MARINE & CONSILIUM MARINE OPSIS M800 System Continuous emisson monitoring The DNV certified OPSIS M800 System is a scrubber exhaust monitoring system based on a non-contact method, using an optical measurement path operating across the duct. The system measures all relevant gases such as NO, NO2, SO2, CO2, CO, NH3, CH4 and many more with just one analyzer, making the maintenance part very small. Upcoming regulations The global environmental impact from ship emissions is significant and the International Maritime Organization (IMO) is enforcing new regulations...

 Open the catalog to page 2
OPSIS M800-3

CONSILIUM MARINE & SAFETY AB Low maintenance - low lifetime cost Thanks to the non-sampling method and the optical monitoring technique, installation is easy, the energy consumption is low and the maintenance minimal. In addition to this, the system is self operating, with a high reliabilty, ensuring a very low lifetime cost. Monitoring systems for more than 15 years The OPSIS monitoring systems have been installed all over the world, many of them with more than 15 years trouble free operation.The system has proven to be the most reliable and cost efficient solution possible for continous emission...

 Open the catalog to page 3
OPSIS M800-4

You find us worldwide Stockholm Gothenburg Oslo Rotterdam Zeebrugge Helsinki Newcastle Glasgow Rochester Hamburg Pusan Dammam Houston Long Beach New York Ft Lauderdale Barcelona Bilbao Dalian Mumbai Vishakhapatnam Naples Florence Genua Tokyo Shanghai Hong Kong Hanoi Ho Chi Minh Abu Dhabi Dubai Oman Consilium Offices Sales & Service Representatives

 Open the catalog to page 4
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.