Conrad Barge 65

Product catalog summary

General Overview
The Conrad Barge 65 is designed as a classic style motor yacht, reminiscent of Dutch barge vessels. It features a steel hull, deckhouse, and wheelhouse with teak finishes and stainless steel fittings. The yacht is related to the Conrad Classic 58 and aims to maintain a high standard of finishing quality and equipment.

Main Characteristics
- Length Overall (LOA): 20.0 m
- Beam: 4.70 m
- Draft: 0.90 m
- Displacement: Approx. 65 tons
- Maximum Speed: Approx. 10 knots
- Cruising Speed: Approx. 8 knots
- Main Engines: 2 x Volvo-Penta D4-180 (180 HP each)
- Generator: Mastervolt 16 kW

Hull & Superstructure
The hull is constructed from shipbuilding grade mild steel with a round bilge shallow draft design. The deckhouse and wheelhouse are also made of steel, with teak trimming and sliding doors.

Propulsion & Steering
The yacht is powered by two Volvo-Penta engines connected to gearboxes. It features twin spade rudders and hydraulic steering gear from VETUS, with additional maneuverability provided by bow and stern thrusters.

Anchor & Mooring
Anchors are located on both sides of the hull, with electric windlass operation from the wheelhouse. The yacht includes stainless steel mooring bollards and fairleads.

Deck Equipment
The deck is fully covered with teak planks, and the yacht includes traditional mahogany skylights, large thermo-glass windows, and a folding aluminum mast. A bimini tent covers the aft deck.

Interior Outfitting
The yacht features five cabins, including an owner's cabin, VIP cabin, guest cabins, and a crew cabin. The interior is styled traditionally with mahogany finishes, and the main salon includes a steering station and galley.

Ventilation & Air-conditioning
Natural ventilation is provided by stainless steel cowls, with additional electric extractor fans in bathrooms. The air-conditioning system can also be used for heating.

Systems
- Fresh Water: Integral tanks with electric water heaters.
- Sea-water: Used for engine cooling and firefighting.
- Sewage: Integral holding tank.
- Bilge and Fire-fighting: Electric bilge pump and submersible pumps in watertight sections.

Electrical Installation
The main electrical system is 24V DC, with 230V AC sockets in key areas. Power is supplied by batteries, a generator, or shore connection.

Preliminary Equipment Specification
The yacht includes high-quality materials and equipment, such as mahogany joinery, granite tops, Siemens appliances, and a comprehensive navigation system by Raymarine.

Safety
The yacht is equipped with safety equipment for nine persons, including life rafts and portable safety gear according to CE regulations.

Catalog excerpts

Preliminary specification for the client Builder & design owner Gdansk, Poland

Open the catalog to page 1

Conrad Barge 61 will be designed as a motor yacht in style referring to classic 'Dutch barge' type vessels. She will have steel hull, deckhouse and wheelhouse that will be additionally finished with teak. Stylish stainless and chromed fittings add for a classic image of the yacht. Related vessel for Conrad Barge 61 will be motor yacht Gentleman (Conrad Classic 58), specifying - unless specified differently - finishing quality level, equipment standard and yacht interior style. It is the intent of this document to establish preliminary description of a classic style motor yacht. In the event of...

Open the catalog to page 2

Deckhouse and wheelhouse made of shipbuilding grade mild steel. Wheelhouse with teak trimming, equipped with one-wing sliding door on the port side, companionway sliding hatch aft leading to the aft deck and emergency integral hatch placed on the midship (port side). 3. Main engines & propulsion Two VOLVO-PENTA D4-180 (180 HP) engines connected to gearboxes, are installed on elastic mounts in the engine room. Two shaft lines - make and characteristics of shafts and propellers will be resulting from the design. Twin profiled spade rudders welded right behind the propellers for better efficiency....

Open the catalog to page 3

6.3. Teak deck & gratings Main deck fully covered with teak planks, deckhouse roof and wheelhouse roof covered with anti-sliding paint. 6.4. Deck tables & benches In the aft, under bimini tent, space for folding table and 5 loose deck chairs will be provided. Folding aluminum mast shall be installed on deckhouse roof in bow area. Above aft deck bimini tent will be spread. Bimini shall be spread between two racks made of stainless steel pipe and stainless fittings. In the aft there will be remote controlled extending hydraulic gangway installed, with teak grating and automatic stanchions. Make:...

Open the catalog to page 4

toilet & bidet locker with mirror locker under washbasin top towel hangers hinged lockers, linen locker single bed with lockers underneath ceramic washbasin locker with mirror locker under washbasin top shower cabin ceiling light towel hangers washing machine double bed with lockers under shower cabin (only starboard side cabin) ceramic washbasin locker under washbasin top ceiling light towel hangers

Open the catalog to page 5

stainless steel sink electric oven with microwave galley extractor hanging lockers over the galley top spotlight over the galley top in dining area there will be folding table and 4 seats, forming the bed when the table c-shaped sofa folding swivel dining/ coffee table steps inside yacht - main companionway steering station Natural ventilation is by a set of stainless steel ventilation cowls with dorade boxes. The bathrooms are additionally ventilated with electric extractor fans. Air-conditioning system by DOMETIC or WEBASTO, with main chiller installed in the engine room. The system working...

Open the catalog to page 6

One big electric bilge pump placed in the engine-room pumps out the bilge-water of all the section and serves also alternatively as a fire-fighting pump. The main bilge pump manifold is placed in the engine-room. Besides that all watertight sections are provided with small electric submersible pumps working in automatic mode. Main electrical installation is 24V DC. Besides that each cabin, main saloon, navigation area, galley area and main engine-room are equipped with 230V AC sockets. Main energy source for 24 V DC are battery bunks, which will be recharged by battery charger supplied by generator...

Open the catalog to page 7

Custom made teak table

Open the catalog to page 8

All CONRAD S.A. catalogs and brochures

Archived catalogs

Conrad Classic 50
4 Pages
CONRAD 66
9 Pages