Catalog excerpts


TECHNICAL DATA SHEET PLASTILAQUE 340 GENERIC TYPE TYPE : HIGH GLOSS TOP COAT : TWO-PACK 100% POLYURETHANE DESCRIPTION: PLASTILAQUE 340 is a marine quality 100% polyurethane top coat, offering optimal physical and chemical resistance. Presented in two-packs, this top range lacquer guarantees very high gloss on a well-prepared surface. CLASSIFICATION: AFNOR NF T.36.005 - Family I - Class 6a PHYSICAL PROPERTIES: Resin binder Density at 20°C (for white) Viscosity NF 4 at 20°C Solids Flash point Pot life at 20° C Colour Finish Mix by volume : Polyurethane - polyester : 1.25 + 0.05 : 300" + 5" : 57 + 2 % by volume : > 23 °C : 4 to 6 hours : White + 22 standards shades (pigments chosen for their UV resistance) : High gloss : 2 parts base + 1 part hardener SURFACE PREPARATION: PLASTILAQUE 340 must be applied on a clean and dry surface, prepared beforehand with our range of primers and coatings. Refer to our recommendation sheets for polyester, aluminium, steel and wood surfaces (applies directly onto a gelcoat degreased with acetone). PAINT PREPARATION: Mix the base and hardener separately before mixing together. Only add the thinner once the base and hardener have been mixed. APPLICATION: PLASTILAQUE 340 can be applied readily by brush, roller or spray. Thinning : Brush or roller : 5-10% THINNER T23 Spray : up to 40% of THINNER T10 (use THINNER T23 for temperatures > 23 °C) Recommended thickness per coat : 70 microns wet (40 microns dry) Drying time at 20°C : Surface dry : 1 hour To touch : 3 hours Sandable : 24 hours To recoat : With the same product; max. 48h without preparation. Beyond; proceed to deglazing. Coverage : Theoretical : 14 m²/l of mixing Practical : 10 m²/l Temperature range : Min. 8°C - max. 30°C PACKING AND SHELF-LIFE: Available in: Shelf-life: Packs of 0.75 litres, 2.5 litres and 6 litres. 24 months unopened and stored in a dry place. HEALTH AND SAFETY: Please refer to packaging. Material Safety Data Sheet available on request. This data sheet is aimed at informing our costumers about our products’ properties. These products are in accordance with the purpose they are intended for so far as they are applied in conformity with the rules outlined by SEPV & DTU in force when the work is being carried out. On account of the permanent evolution of techniques, it is up to our costumers to check with our company that the hereby data sheet has not been changed before starting work.

Open the catalog to page 1

All COMUS MARINE catalogs and brochures


    1 Pages


    1 Pages


    1 Pages

Archived catalogs

  1. N°6

    1 Pages