TECHNICAL DATA SHEET OILY COATING 127 GENERIC TYPE TYPE : FILLER COATING : GLYCEROPHTALIC DESCRIPTION: OILY COATING 127 is a glycerophtalic coating that can be applied readily with a knife and is used to prepare wooden surfaces before applying a topcoat finish like PLASTILAQUE 127. Can also be used for smoothing out mineral surfaces (cement, concrete, brick). CLASSIFICATION: AFNOR NF T.30.003 - Family IV - Class 2 PHYSICAL PROPERTIES: Resin binder Pigment Density at 20°C Viscosity Solids Flash point Colour Finish : Modified vegetable oils : Titanium and selected fillers : 1.85 ± 0.05 : Does not apply : 86% ± 2% by weight : > 21°C : Off white : Matt satin SURFACE PREPARATION: OILY COATING 127 must be applied on a clean and dry weakly absorbing surface. On new or sanded wood, soak beforehand with thinned WOOD PRIMER 127. PAINT PREPARATION: Mix thoroughly to remove any liquid residue floating on the surface. APPLICATION: OILY COATING 127 can be applied with a large knife in thin coats (<1mm), without rolling or sanding it dry. A second coat can be applied after 1 or 2 hours depending on the temperature. Recoating with a topcoat after 24 hours at 20°C Coverage : depends on coat thickness PACKING AND SHELF-LIFE: Available in : Shelf-life: 0.5 or 2.5 litres 12 months unopened and stored in a dry place. HEALTH AND SAFETY: Please refer to packaging. Material Safety Data Sheet available on request. V90727 This data sheet is aimed at informing our costumers about our products’ properties. These products are in accordance with the purpose they are intended for so far as they are applied in conformity with the rules outlined by SEPV & DTU in force when the work is being carried out. On account of the permanent evolution of techniques, it is up to our costumers to check with our company that the hereby data sheet has not been changed before starting work. SEPV - 2 Rue Henri ROL TANGUY— 91 180 ST GERMAIN LES ARPAJON - Tél. 01 69 88 13 10 - Fax. 01 60 84 04 81 - www.plasticoque.com