Website:
Composite Integration Ltd
Catalog excerpts
Vacuum Equipment: 30 litre Vacuum Tanks/Resin Traps 30 Litre In-Line Resin Trap 30 Litre fabricated steel catch-tank for use in infusion processes or as an in-line resin trap between the VRTM mould and the vacuum system Robust and rated for vacuum use Fits standard 10 litre plastic buckets Silicone vacuum edge seal 12mm aluminium primary lid with secondary clear acrylic lid/window Ball valve controlled vent Base mounted on wheels Available with a selection of standard through-lid connections (see list below) Other connection configurations available on request Resin Trap Options Resin Trap 30 Litre In-Line Resin trap Resin Inlets connectors Through-lid resin hose connectors for incoming vent hoses from mould– specify the hose diameter and number 07 08 09 Connection for incoming vacuum line (from pump) Specify two connectors if the resin trap is to be used as a simple in-line emergency trap between a pump and mould Note: All specifications are subject to change without notice: How to specify/order: To specify a configuration use the pump part number followed by the required option numbers separated by a hyphen. e.g. XV-0500-04-10 specifies a 30 litre resin trap with 4x10mm resin inlet connectors and 1x GEKA vacuum connector (see illustrated example) Unit 1 Burraton Road Saltash Parkway Industrial Estate Saltash, Cornwall, UK, PL12 6AY +44(0)1752 849998 info@composite-integration.co.uk www.composite-integration.co.uk
Open the catalog to page 1All Composite Integration Ltd catalogs and brochures
-
In-Mould Air Ejector1 Pages
-
Vacuum Equipment - Dry Vane3 Pages
-
RTM Light Tool Training2 Pages
-
Temperature Control Unit2 Pages
-
Injection Valve3 Pages
-
IMPS Equipment3 Pages
-
Mould Seals2 Pages
-
Mould Clamps2 Pages
-
Calibrated Sheet Wax1 Pages
-
Mould Inserts3 Pages
-
Ciject Five5 Pages
-
Ciject Four6 Pages
-
Ciject Three1 Pages
-
COMPOSITE INTEGRATION PART15 Pages
