Vacuum Equipment - Rotary Claw


Catalog excerpts

Vacuum Equipment - Rotary Claw - 1

Vacuum Equipment: Rotary-Claw Vacuum Pump Systems Vacuum Systems (Rotary-claw type) Rotary-claw type pumps are ideally suited to large scale VRTM processes, combining exceptional toughness, high flow rates and low output noise. This type of vacuum pump is not adversely affected by air-admittance during the moulding process (‘rough’ vacuum) unlike oil-lubricated pumps which, despite achieving higher levels of vacuum, will vent oil vapour if used in this type of application. Available as stand-alone pumps or in a range of configurations. High output oil free rotary-claw type vacuum pump Vacuum levels down to 150 mbar absolute Highly reliable and relatively quiet Very high flow rate ideally suited for multiple mould operation Replaceable cartridge filter to prevent dust and fibre entering the vacuum pump Long service intervals Standard vacuum pump is three phase 415 volt supply, rated output 1300 litres/ min with maximum vacuum level of 100-150mbar absolute Options Simple ON/OFF Control Start/stop DOL control with Motor overload protection Full Switching Control User adjustable digital switching unit to minimise pump operation whilst providing constant vacuum output. Automatically turns pump ON/OFF between pre-set max/min vacuum level settings. Control unit with MCB fusing, E Stop and power switching Hours-Run Meter Electronic counter to record the total pump use in hours Allows accurate planning of service intervals Absolute Vacuum Gauge Digital display to provide readout of vacuum level from atmospheric pressure down to zero mbar Large Reservoir 200 litre vacuum reservoir Includes six vacuum take-offs (three fitted with regulators) Regulators provide constant downstream vacuum independent of upstream variations Unit 1 Burraton Road Saltash Parkway Industrial Estate Saltash, Cornwall, UK, PL12 6AY +44(0)1752 849998

Open the catalog to page 1
Vacuum Equipment - Rotary Claw - 2

Vacuum Equipment: Rotary-Claw Vacuum Pump Systems (continued) Machine Item/Option Part Number Vacuum Pump System 78m³/hr Vacuum Pump Three phase Options Simple on/off control Full switching Control Absolute vacuum readout Hours-Run Meter Available with either control option (simple or full-switching) Large reservoir Vacuum pump Spares Kits XV-0300-SK Spares kit- 78m³/hr Vacuum Pump Note: All specifications are subject to change without notice: How to specify/order: To specify a configuration use the pump part number followed by the required option numbers separated by a hyphen. e.g....

Open the catalog to page 2

All Composite Integration Ltd catalogs and brochures

  1. Mould Seals

    2 Pages

  2. Mould Clamps

    2 Pages

  3. Ciject Five

    5 Pages

  4. Ciject Four

    6 Pages

  5. Ciject Three

    1 Pages