Vacuum Equipment - Oil Filled
2Pages

{{requestButtons}}

Catalog excerpts

Vacuum Equipment - Oil Filled - 1

Vacuum Equipment: Oil Filled Vacuum Pump Systems Vacuum Systems (Oil-filled type) A range of oil-filled vacuum pumps ideally suited to ‘infusion’ type processes where high level vacuum is required. Reliable and robust oil-filled rotary-vane, air cooled pumps Vacuum levels down to 0.2 mbar absolute Oil mist separator with air exhaust filters, demisters and oil filter Fitted with replaceable cartridge-filter to prevent dust and fibre entering the vacuum pump Options Single Phase Supply Option Larger (25 and 40³/hr) pumps can be specified for three phase or single phase supply Simple ON/OFF Control Start/stop DOL control with Motor overload protection Full Switching Control User adjustable digital switching unit to minimise pump operation whilst providing constant vacuum output. Automatically turns pump ON/OFF between pre-set max/min vacuum level settings. Control unit with MCB fusing, E Stop and power switching Absolute Vacuum Gauge Digital display to provide readout of vacuum level from atmospheric pressure down to zero mbar Hours-Run Meter Electronic counter to record the total pump use in hours Allows accurate planning of service intervals Small Reservoir 20 litre reservoir Includes two vacuum take-offs (one fitted with regulator) Regulator provide constant downstream vacuum independent of upstream variations Large Reservoir 200 litre reservoir Includes six vacuum take-offs (three fitted with regulators) Regulators provide constant downstream vacuum independent of upstream variations Frame mounting Pump Mounted onto simple compact base frame with 2 x swivel/stop castors and 2 x fixed castors (required if a control option is chosen but no reservoir) Unit 1 Burraton Road Saltash Parkway Industrial Estate Saltash, Cornwall, UK, PL12 6AY +44(0)1752 849998 info@composite-integration.co.uk www.composite-integration.co.uk

Open the catalog to page 1
Vacuum Equipment - Oil Filled - 2

Vacuum Equipment: Oil Filled Vacuum Pump Systems (continued) Machine Item/Option Part Number 4m³/hr Vacuum Pump 16m³/hr Vacuum Pump single phase single phase 25m³/hr Vacuum Pump 40m³/hr Vacuum Pump three phase three phase single phase single phase R5 Vacuum Pump System Options Simple on/off control Full switching Control Absolute vacuum readout Hours-Run meter Available with either control option (simple or full-switching) Small reservoir Large reservoir 200L Suitable for 16 m³/hr and above pumps Frame Mounting Available for all pumps– required if no reservoir specified Spares kit- 4m³/hr...

Open the catalog to page 2

All Composite Integration Ltd catalogs and brochures

  1. Mould Seals

    2 Pages

  2. Mould Clamps

    2 Pages

  3. Ciject Five

    5 Pages

  4. Ciject Four

    6 Pages

  5. Ciject Three

    1 Pages