Vacuum Equipment - Dry Vane
3Pages

Vacuum Equipment: Dry-Vane Vacuum Pump Systems Vacuum Systems (Dry Vane Type) Simple, robust and efficient dry-running vacuum pumps ideally suited to VRTM processes. This type of vacuum pump is not adversely affected by air-admittance during the moulding process (‘rough’ vacuum) unlike oil-lubricated pumps which, despite achieving higher levels of vacuum, can vent oil vapour if used in this type of application. Available as stand-alone pumps or in a range of configurations. High-output oil-free rotary vane vacuum pumps Range of rated outputs with maximum vacuum level of 100-150mbar absolute Fitted with Replaceable cartridge-filter to prevent dust and fibre entering the vacuum pump Running time approx 4000-8000 hours between service intervals Available configured to suit single or multi-mould operations 3 Phase Supply Option Larger (25 and 40³/hr) pumps can be specified for three phase or single phase supply Simple ON/OFF Control Start/stop DOL control with Motor overload protection Full Switching Control Digital display of vacuum level (gauge) User adjustable digital switching unit to minimise pump operation whilst providing constant vacuum output. Automatically turns pump ON/OFF between pre-set max/min vacuum level settings. Control unit with MCB fusing, motor overload protection, and solid-state relay power switching Absolute Vacuum Gauge Digital display to provide readout of vacuum level from atmospheric pressure down to zero mbar Unit 1 Burraton Road Saltash Parkway Industrial Estate Saltash, Cornwall, UK, PL12 6AY +44(0)1752 849998 info@composite-integration.co.uk www.composite-integration.co.uk

Vacuum Equipment: Dry-Vane Vacuum Pump Systems Hours-Run Meter Electronic counter to record the total pump use in hours Allows accurate planning of service intervals Small Reservoir 20 litre vacuum reservoir Includes two vacuum take-offs (one fitted with regulator) Regulator provide constant downstream vacuum independent of upstream variations Large Reservoir 200 litre vacuum reservoir Includes six vacuum take-offs (three fitted with regulators) Regulators provide constant downstream vacuum independent of upstream variations Frame Mounting Pump Mounted onto simple compact base frame with 2...

Vacuum Equipment: Dry-Vane Vacuum Pump Systems (continued) Examples of SECO Configurations A small mobile vacuum system specifically configured for VRTM processes. (Configuration part number XV-0100-01-11-20) 5m³/hr SECO pump mounted on a 20 litre reservoir Unit supplied with one full vacuum outlet (with gauge) and one regulated vacuum outlet (with gauge) each with quick couple connections. User adjustable, reservoir mounted, digital switching unit to minimise pump operation whilst providing constant vacuum output. Vacuum system configured specifically for multi-mould VRTM Processes....