IMPS: In Mould Pressure Sensor systems IMPS: In Mould Pressure Sensor System The IMPS range of pressure sensors and readout units has been developed specifically for accurate pressure monitoring/control in RTM and Resin Infusion moulding processes. A range of fittings is available to allow sensors to be mounted through the surface of a composite or metal mould or into a vacuum bag. IMPS Sensors can be used to provide in-mould feedback control to Ciject Injection machines (contact Composite Integration for details) IMPS Pressure Sensors Robust ceramic sensor. Can be mounted in any position or orientation. Resin can be cured directly against sensor face. ¾” BSP connection. Pressure range: -1.0 to +3.0 bar (Other sensing ranges available on request) Standard Operating Temperature 0°C to 80°C (high temperature versions also available for use up to 120°C) Sensor Cable and connectors 25m cable and connector for connection of pressure sensor to a readout/control unit. Note: Max temperature 80°C Available in 10m, 25m or 40m lengths. Ciject Sensor Extension Lead Cable and connector to extend CIJECT sensor cable to remote IMPS sensor (if using an IMPS sensor to control a Ciject injection/infusion machine. Available in 3m, 10m or 25m lengths. Vacuum Bag IMPS sensor Insert (to fit over ‘spiral’ type resin feed-line) For fitting an IMPS (In Mould Pressure Sensor) into a vacuum bag. (Sensor supplied separately). Designed to fit over standard ‘spiral wrap’ resin feed line. Unit 1 Burraton Road Saltash Parkway Industrial Estate Saltash, Cornwall, UK, PL12 6AY +44(0)1752 849998 [email protected] www.composite-integration.co.uk

Vacuum Bag IMPS Sensor Insert (for mounting insert on flat laminate surface) Allows a sensor to be connected to a vacuum bag for vacuum/pressure monitoring. Complete with integral seal and locking nut. IMPS Sensor Mould Insert %" BSP metal insert for mounting into composite moulds. Enables a pressure sensor to be easily mounted and de-mounted. Designed to be laminated into the structure of a composite mould. IMPS Sensor Port Blanking Plug Plug to close/blank-off Mould Insert when not in use. IMPS Readout Units (available with single or multiple sensor inputs) Readout unit to provide sensor power...

IMPS: In Mould Pressure Sensor systems (continued) Item/Option IMPS Pressure sensor IMPS Pressure sensor IMPS Pressure sensor IMPS Pressure sensor IMPS Pressure sensor IMPS Pressure sensor IMPS Pressure sensor Notes -1 to +19 bar (gauge) -1 to +3 bar (gauge) 0 to 4 bar (Absolute) -1 to +3 bar (Gauge) High temperature 120°c- includes 1m high-temp cable -1 to +3 bar (Gauge) High temperature 120°c- includes 10m high-temp cable 0 to 4 bar (Absolute) High temperature 120°c- includes 1m high-temp cable 0 to 4 bar (Absolute) High temperature 120°c- includes 10m high-temp cable IMPS Readout Units with...