Ciject Zero Resin Injection Machine


Catalog excerpts

Ciject Zero Resin Injection Machine - 1

Injection equipment Ciject™Zero CIJECT™ Zero- RTM/VRTM Injection Machine The lowest cost machine in the Ciject range with a relatively simple manual control system. The machine includes the accurate electronic pressure control necessary for work in both RTM and vacuum processes. The ‘Zero Plus’ option allows additional control functions. Features include: Electronic Pressure Control from –1.0 bar to 8.0 bar Available with mix ratios to suit polyester/vinylester, epoxy or phenolic systems (see options list) Composite Integration Ltd Unit 1 Burraton Road Saltash Parkway Industrial Estate Saltash, Cornwall PL12 6AY Simple and reliable operator control Automatic mixing head Purpose designed resin and 316 Stainless Steel catalyst pumps for high reliability and simple maintenance Manually adjustable injection speeds with digital pump count readout Low volume non pressurised mixing-head flush system to ensure simple and quick cleaning

Open the catalog to page 1
Ciject Zero Resin Injection Machine - 2

Injection equipment Ciject™Zero (Continued) CIJECT™ Zero- Machine Options ‘Zero-Plus’ Option Option to enable additional control functions: Pre-settable volume/pump counter with auto-stop Flush alarm (provides timed audible warning after injection) Service interval alarm Lockable settings High-Flow Head Option Injection mix-head designed to optimise material flow Robust actuated ball-valve recirculation valves High-Flow Hose Option For use to maximise machine output. Particularly useful when using higher viscosity resins. Large bore resin inlet and feed hoses with suitable filter Standard...

Open the catalog to page 2
Ciject Zero Resin Injection Machine - 3

Injection equipment Ciject™Zero (Continued) 240 volt flexible heated jacket with quick release buckles to heat 1000L Intermediate Bulk Container. 1000mm x 4400mm (3900mm Heated Length) Switchable upper and lower heat zones (1000 watt each zone) Performance: Water temperature with insulation lid 15 - 80°C in 56 hours Barrel Heater 240 volt flexible jacket to heat 200 litres barrel to a maximum of 80°C. Silicone insulated heating element with PU covered Polyamide cover. IP 40 Protection and 5 metre connection cable. Conversion kits To convert a machine originally configured for use with one...

Open the catalog to page 3
Ciject Zero Resin Injection Machine - 4

Injection equipment Ciject™Zero (Continued) Machine Item/Option Part/option Number Ciject Zero Injection Machine OPTIONS Polyester version Phenolic Version ‘Zero Plus’ Option High-flow Head option High-flow Hose option Ciject Zero Spares Kits Options XE-0000-SK Polyester option 0.5% - 3.5% ratio range Epoxy option 100:12.5 - 100:50 ratio range Epoxy option 100:25– 100:100 ratio range Phenolic option 1%-8% ratio range High Flow Injection Head option Ciject Zero Options Automatic Injection Valve See Injection Valve data sheet for full list of configuration options and part numbers Resin feed...

Open the catalog to page 4

All Composite Integration Ltd catalogs and brochures

  1. Mould Seals

    2 Pages

  2. Mould Clamps

    2 Pages

  3. Ciject Five

    5 Pages

  4. Ciject Four

    6 Pages

  5. Ciject Three

    1 Pages