Possible tiller, rudder, keel and bulb components for your i550 build. Possible help with plywood kits for your i550 build Go with Phil's Foils / Competition Composites Inc for proven speed and quality, allowing you to concentrate on the construction of your dream ride. Tillers: these are often an after-thought and made of fragile and high maintenance wood. Not to mention, these being heavy too (ours weigh less than lib). a) Glass over foam tiller in high gloss white $375 b) Carbon over foam tiller in high gloss white $450 c) Carbon over foam tiller in clear coat finish $575 Rudders: Again this is an open design for the builder to look at, so we will happily take your design and mill cores to suit. We will apply our years of foils experience as needed to stop any terrible mistakes too! We offer a standard rudder, a molded rudder or twin rudders to our specification (see pictures), in the following states: a) Rudder core in wood and foam (milled accurately) $500 b) Rudder core, laminated (ex-vacuum bag) $1,000 c) Rudder fully finished in high gloss white $1,500 d) Twin rudders fully finished $2,200 e) Carbon fiber gudgeons <add per foil> $450 f) Optional racing wet sand <add per foil> $190

Keel Struts: We have a lot of experience in dealing with these on many different sports boats. We recommend a wood and foam composite core, and no stringer needed due to the light nature of the keel bulb. We offer a standard keel strut to your specification and following the i550 box rule, ready drilled to accept keel bulb fittings, in the following configurations: a) Keel strut core $650 b) Keel strut, laminated (ex-vacuum bag) $1,300 c) Keel strut fully finished in primer (ready for barrier coat) $1,750 Example fixed keel strut shown with plug for keel bulb mold and keel mount bolts. Keel strut...

Spars: these are often an after-thought and purchased used or not correctly for the job at hand. We manufacture carbon tubes of many cross sections and lengths that can easily be customized for this i550 application. As an example, here are some prices: a) Boom oval tube in clear coat carbon with custom laminate b) Fitted boom including goose-neck receiver, vang tang, and outhaul turning block c) Bowsprit tube (tapered) clear coat carbon d) Mast tube (two piece, top tapered), possibly clear coat e) Mast, fully fitted (depends on spec), includes spreaders, brackets and shrouds Plywood kit: fully...