Compensati TORO via Piverone, 4 I 10010 AZEGLIO (TO) web: www.compensatitoro.it e-mail: [email protected] Technical data sheet TORO/HONEYCORE is a lightweight composite constituted by skins of okoumé marine plywood bonded with an honeycomb core made of okoumé plywood manufactured as a lozenge shape structure with dimensions 90 x 50 mm. The particular core confers to the panel good stiffness and excellent mechanical properties in relation to its minimum density, allowing to obtain elements of high thickness and low weight at the same time. This panel find his ideal application in the pleasure boat-building sector, where it is used for the construction of interiors, compartments and bulkheads. It is also produced with skins made of different marine plywood typologies and/or overlaid with decorative sliced veneers. The data reported in the table below are an example of the possible composition between those available on request. Performance characteristics1 Reference Standard Thickness Composition Density Bending strength: parallel to grain Modulus of Elasticity in bending: parallel to grain perpendicular to grain Skins of okoumé marine plywood Thickness Bonding quality Formaldehyde release Honeycomb core of okoumé plywood Thickness Bonding quality Formaldehyde release 1 Warning: The information given in this data sheet must be considered as mean values resulting from internal controls and are therefore indicative. The buyer is responsible for assessing the suitability of the panels to the specific application to which they are intended. He is also responsible that the modality of transport, storage and use of the panels are correct and conform to the guideline of the supplier and the requirements of applicable standards.