COMPENSATI TOKO CerfOTetf Quality System > e-mail: info(@compensatitoro.it Technical data sheet The flame retardant TORO/APIROS/OKOUME' plywood, bonded with melamine adhesive, is made with rotary cut okoumé veneers previously subjected to an impregnation in the mass by a special chemical solution which confers to the wood a significant behaviour against fire. The panel is characterized by its lightness and ease of processing, but it also shows good mechanical properties and natural durability. It is designed to meet safety requirements in terms of prevention and fire protection. Fire reaction TORO/APIROS/OKOUME' plywood is CE marked conforming to EN 13986 for use in construction as non structural element in dry and humid conditions, in compliance with the requirements of the Construction Products Its fire behaviour is certified according to EN 13501-1, as follows: panel in the thickness range between 4 and 9 mm: Euroclass B-s2, dO for application as wall and/or ceiling lining, in contact with non-combustible support (certificate No. 0987-CPD-144); panel in the thickness range between 9 and 50 mm: Euroclass B-s2, dO for application as wall and/or ceiling lining, in contact with no support (certificate No. 0987 - CPD -145); panel in the thickness range between 9 and 50 mm: Euroclass BFL-s1 for application as floor covering, not in contact with any support (certificate No. 0987-CPD-136). 1 Warning: The information given in this data sheet must be considered as mean values resulting from internal controls and are therefore indicative. The buyer is responsible for assessing the suitability of the panels to the specific application to which they are intended. He is also responsible that the modality of transport, storage and use of the panels are correct and conform to the guideline of the supplier and the requirements of applicable standards.