XR Series Frequency Agile Receivers MAY 2013 Data Sheet The most important thing we build is trust The XR Series of receivers from Cobham are advanced technology microwave receivers capable of operation at 1.7 – 2.7 GHz. The XR Series demodulates one video and two audio signals from a composite analog RF source. The XR Series is fully synthesized and operates at 16 pre-programmed channels. The channel select is controlled by a microprocessor and a BDC rotary switch sets the desired channel. The XR includes LED display for representation of power and signal strength to facilitate path alignment, The XR Series features a Preselect Band Pass Filter and integral Low Noise Amplifier at the RF input with a nominal noise figure of 5 dB. The XR employs dual SAW filters at the IF stage for enhanced adjacent channel interference rejection. Two buffered video output signals and two balanced audio outputs are provided at a DB15 connector. NTSC and PAL standards are available. Small size, low power consumption and 1^2C control make the XR Series ideal for use in remote applications.

XR Series Frequency Agile Receivers MAY 2013 Data Sheet Specifications: RF Frequency Range: Frequency Stability: Noise Figure: Dynamic Range: Sensitivity: Input Impedance: Power Voltage: Current: Video Output Impedance: Output Level: De-emphasis: Frequency Response: 75 Ω 1 volt (peal to peak) Per CCIR 525/625 line 10Hz – 5 MHz NTSC: 5.5 MHz Pal Meets or exceeds EIA/TIA 250-C end to end performance specifications Environment Humidity: Temperature: Audio Subcarriers (any two): Output Impedance: Output Level: Meets or exceeds EIA/TIA 250-C end to end performance specifications Mechanical Size: 3.25”...