NETNode IP Mesh Radio Phase 3 (Robust) COFDM – Video, Audio Telemetry and IP Products September 2012 Data Sheet The most important thing we build is trust Cobham NETNode IP mesh radios are the latest innovations in the expanding range of Cobham Tactical Communications and Surveillance solutions improving surveillance connectivity. NETNode IP radios can be combined in a fluid self forming, self healing mesh containing up to twelve radios. The NETNode radios within the mesh exchange data on a single frequency, simplifying frequency management. The entire mesh occupies just 2.5MHz of bandwidth (3.0, 3.5, 5.0 and 6.0MHz also available). The NETNode radios employ the unique Cobham COFDM modulation scheme and therefore offer excellent RF penetration and performance in the presence of multipath. The NETNode mesh radios can provide up over 5.0 (6.0)Mb/s of IP data (data rate depends on mode, number of nodes and range between nodes). This available bit-rate can be used to exchange IP data traffic between nodes. The highly flexible mesh topology means that data can be exchanged between nodes in a point-to-point or multi-point fashion; range can be extended by using nodes as repeaters. The self-forming, selfhealing mesh architecture makes the NETNode product ideal for use in mobile surveillance applications, command and control applications, or advanced robotics. The NETNode can be connected to third party composite cameras using the NETAV option. Two PTZ control channels are available to enable control of third party PTZ cameras. Alternatively, there are dedicated PTZ camera solutions available for direct connection to the NETNode e.g. CAMPTZ* is a high performance, high quality day/night PTZ camera for long range and overt surveillance, this option requires the NETAV option to be fitted. Third party IP cameras can also be directly connected to the NETNode. Security of the entire mesh network can be ensured by the use of the optional AES128 or AES256 encryption. Control of the deployed mesh is achieved using the inbuilt web browser or comprehensive Mission Commander PC application. This software suite, based around a mapping display, is used to configure and monitor the mesh and wider Cobham Surveillance systems, and to control its nodes and cameras. Video can be viewed on the PC device using the Mission Commander software and recorded using Milestone Compatible recorders.

NETNode IP Mesh Radio Phase 3 (Robust) COFDM – Video, Audio Telemetry and IP Products September 2012 Data Sheet Specification: Open Audio comms channel (shared voice channel) Interfaces RF Interfaces (Antenna 1 and 2) Multi-user audio comms channel Typical range NETNode-3R-217250 (1W) Non Line of Sight Light urban 500-700m NETNode2W-3R-217250 (2W) Non Line of Sight Light urban 800-1400m Interface microphone level/headphone o/p G726 32kbit audio 8KHz sampling and mute Encryption Type Data interface RF Interfaces Antenna 1 Antenna 2 Switched transmit receive antenna Receive only antenna RS232/RS485...

NETNode IP Mesh Radio Phase 3 (Robust) COFDM - Video, Audio Telemetry and IP Products September 2012 Data Sheet Product Code: Product Code Includes: IP Mesh Node Phase 3 Robust 1W 1.65- IP Mesh Node Phase 3 Robust 1W 2.17- IP Mesh Node Phase 3 Robust 1W 4.4- IP Mesh Node 2W Phase 3 Robust 1.65- IP Mesh Node 2W Phase 3 Robust 2.17- IP Mesh Node 2W Phase 3 Robust 4.4- Power & Ethernet external cable 5m Control & Data external cable 2m Headset adaptor cable Accessory Options: Composite Video and Audio input for COFDM IP Mesh Node Robust PSU15/5 AC Power Supply IP66 Robust Mesh Node CAMPTZ* Pan,...