HIPERBARIC SYSTEMS
2Pages

{{requestButtons}}

Catalog excerpts

HIPERBARIC SYSTEMS - 1

GAS INSTALLATION The gas installation is used to store breathing gases, to send them through to the chamber, to take them away from the chamber, to carry out pressure gauging of the breathing gases and to test their composition. The principal elements of the gas installation were chosen on the basis of safety and wellbeing requirements related to persons who find themselves in an environment with increased pressure. All the installation components were prepared and assembled to take into account the strict regulations regarding oxygen purity. MEASUREMENT SYSTEM The extensive measurement system is used to control the atmosphere parameters of the chamber compartments and it also measures pressure, temperature, humidity and the oxygen and carbon dioxide content. In addition, the system allows monitoring of other gases and harmful impurities – it uses special instruments to take gas samples directly from the chamber compartment. The measurement system has a more important role than other installations, as it controls the safety of the people who are in the chamber and allows for its correct use. All the parameters relating to the pressure procedures that are being carried out, are displayed at the same time on a display screen, which allows the situation to be monitored in a given compartment or in both chamber compartments simultaneously. It is also possible to record this data. TRANSPORT POSSIBILITIES The hyperbaric systems, which are manufactured by us, are very mobile and autonomous in operation, thanks to which their potential use is extensive. Thanks to their container structure and the mass not exceeding 10 tons, they are suited for the standard land transport, as well as transport by sea or air. Hyperbaric procedures can be carried out during the transportation of the system. The containerized rescue and hyperbaric treatment chamber system, manufactured by Climarem,is an up-to-date and technologically advanced system, which fulfills all the specialist standards. It is fully equipped and easy to transport, making the system truely universal with a wide range of potential uses. HYPERBARIC AUTONOMOUS QUALITIES OF THE SYSTEM Apart from the possibility to connect external electric power supply and breathing gas sources, there is also an option for independent operation of the system, using the equipped gases and the 12 equipped accumulators. When fully charged, they allow for an autonomous operation of the system, with no external supply, for at least 24 hours. Thanks to the chamber having a transfer compartment, there is an option of medical personnel transfer, and thanks to the fact, that every compartment has its own independent service field, it is possible to simultaneously carry out two different hyperbaric or medical decompression procedures. The standard terminals which are located on the access doors, allow for the attachment of transport chambers. Climarem Sp . z o.o. (formerly PBUCH S.A.) Hutnicza 4, 81-061 Gdynia, Poland tel. +48 58 623 30 81, fax. +48 58 663 34 24 e-mail:climarem@climarem.pl www.climarem.pl

Open the catalog to page 1
HIPERBARIC SYSTEMS - 2

PRIMARY TECHNICAL DATA The Containerized Rescue and Hyperbaric Treatment Chamber System (Decompression Chamber), manufactured by CLIMAREM, consists of a two-compartment pressure chamber complete with equipment in a specially adapted, 20 feet insulated container. The system is used for the treatment of ilnesses and injuries, which occur as a result of increased hydrostatic pressure and to carry out training exercises for submarine crew members and divers. The equipment was designed to hold maximum 14 people, where 10 places are located in the rescue and treatment compartment and the...

Open the catalog to page 2

All CLIMAREM Sp. z o.o. catalogs and brochures

  1. WBX an

    1 Pages

  2. WCU

    1 Pages

  3. ZH

    1 Pages

  4. ZHR

    1 Pages

  5. ZV

    1 Pages

  6. ZVR

    1 Pages

  7. CU

    1 Pages