*mynauticexpo

Catalogs
Clasen & Co. KG, Holger
Battery-operated crimping tool

Battery-operated crimping tool

Product catalog summary

Overview
This document provides technical specifications and benefits of the RC 5 battery-operated crimping tool by Holger Clasen, designed for crimping cable lugs and connectors up to 185 mm² according to DIN standards. It is suitable for use in transportation companies, energy supply and utility companies, power stations, switch cabinet construction, and industrial cable assembly.

Key Benefits

The tool features a narrow, pivoting head for easy crimping in confined spaces.
It offers ergonomic one-hand operation due to its good balance and low weight.
A two-step hydraulic system reduces crimping time.
LED signals provide control over crimping and battery status.
Accessories are interchangeable with other Holger Clasen battery-operated hydraulic tools.

Technical Data

Crimping Force: 52 kN
Weight without Battery: 3.1 kg
Length: 325 mm

RC 5 Set
The RC 5 set includes the RC 5 tool, a LiA-34 battery, MC-230 charger, carrying strap, and transportation case.

Crimping Ranges

Copper/Aluminum according to DIN 48083: Cu 10 – 185 mm², Al 10 – 150 mm²
ACSR: Al 16 – 95 mm², Steel 2.5 – 25 mm²
Prerounding: SE 35 – 240 mm², SM 25 – 185 mm²
WM-shaped Crimping: 10 – 185 mm²
Arbor Crimping: 6 – 70 mm²

Accessories

Transportation Case: Plastic with compartments for two batteries, charger, and crimping dies.
Carrying Strap: For battery-operated tools.

Batteries

Li-Ion Battery LiA-34: 3.3 Ah, 0.56 kg, charging time approx. 75 min.
NiCd Battery BAT-20: 2.0 Ah, 0.80 kg, charging time approx. 60 min.

Battery Chargers

MC-230: 230 V/50 Hz, 0.50 kg, suitable for all Holger Clasen batteries.
MC-12 Car Charger: 12/24 V car socket, 0.50 kg, suitable for all Holger Clasen batteries.

Power Supply Unit

NT-Hyk: 230 V/50 Hz, 5 m cable, 0.80 kg, dimensions 125 x 70 x 120 mm, temperature range 10 – 40°C.

Catalog excerpts

Akku-Presswerkzeug Battery-operated crimping tool RC 5 Verpressen von Kabelschuhen und Verbindern bis 185 mm2 nach DIN; in den Bereichen Verkehrsbetriebe, EVU, Stadtwerke, Kraftwerke und deren Dienstleister, Schaltschrankbau sowie in der industriellen Anwendung. Crimping of cable lugs and connectors of up to 185 mm2 according to DIN; for transportation companies, energy supply and utility companies, power stations and their service providers, as well as in switch cabinet construction and industrial cable assembly. Technische Daten Technical Data Artikel Item Presskraft Crimping Force 52 kN Gewicht Länge ohne Akku Length Weight without Battery 3,1 kg 325 mm Artikel-Nr. 768 05 000 RC 5 mit Akku LiA-34, Ladegerät MC-230, Trageriemen und Transportkoffer Item No. 768 05 000 RC 5 with battery LiA-34, battery charger MC-230, carrying strap and transportation case Zubehör Accessories Artikel Item Transportkoffer Transportation Case Trageriemen Carrying Strap Beschreibung Description Kunststoff, mit Fächern für zwei Akkus, Ladegerät u. Presseinsätze Plastic, with a compartment for two batteries, battery charger and crimping dies Für Akku-Werkzeuge For battery-operated tools Verpressen auch an schwer zugänglichen Stellen durch schmalen, drehbaren Kopf. Gute Balance und geringes Gewicht ermöglichen eine ergonomische Einhand-Bedienung. 2-Stufen-Hydraulik sorgt für kurze Verpresszeiten. Kontrolle der Verpressung und des Akku-Status durch LED-Signal der ELWA® basic. Das Zubehör ist innerhalb des gesamten AkkuHydraulik-Programms von HOLGER CLASEN nutzbar. The narrow, pivoting head allows easy crimping even in confined spaces. Good balance and low weight allow ergonomic one-hand operation. The two-step hydraulic rapid feed reduces crimping time. Control of crimp and battery state by® LED signal of ELWA basic. Accessories are interchangeable and can be used with any other HOLGER CLASEN battery-operated hydraulic tool. Pressbereiche Crimping Ranges Cu/Al nach DIN 48083 Cu/Al accord. to DIN 48083 Al/St-Seile ACSR Vorrunden Prerounding WM-Verpressung WM-shaped Crimping Dornverpressung Arbor Crimping Presseinsätze: Eine detaillierte Anwendungstabelle finden Sie auf unserer Homepage im Bereich Downloads unter „Presseinsätze“. Bei weiteren Fragen wenden Sie sich bitte an unser Kunden-Service-Center, Telefon (040) 511 28-0. Crimping Dies: Please find a detailed application table on our homepage in the download area. If you have any further questions please contact our Customer Service Center, phone +49 (0)40 511 28-0. Letzter Stand / Last update 04/2014

Open the catalog to page 1

Artikel Item Akku Lithium-Ionen Battery Li-Ion Akku NiCd Battery NiCd Vorteile 3,3 Ah für 65% mehr Leistung bei 25% geringerem Gewicht. Nutzbar mit allen HOLGER CLASEN Akku-Werkzeugen. Jederzeit einsatzbereit! Selbstentladung < 4%/Monat. Temperaturbereich von -20°C bis +40°C. 3.3 Ah for 65% more power with 25% less weight. Fits with all HOLGER CLASEN battery-operated tools. Always ready for use! Self-discharge < 4% / month. Temperature range -20°C up to +40°C. Kapazität Capacity Gewicht Weight Ladegeräte Battery Charger Artikel Item Ladegerät Battery Charger Autoladegerät Car Charger Ladezeiten...

Open the catalog to page 2

All Clasen & Co. KG, Holger catalogs and brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list