Micros cleat range Nylon and Aluminium Small, neat and lightweight for 1- 4mm 3/64” - 5/32” rope. Advanced tooth technology to hold all types of small rope. Can be fixed with standard screws and rivets, on tubular or flat surfaces. Some Applications - Window blinds (cord control). Canoes (seat & rudder lines). Control lines on dinghies (Optimist booms & carbon tillers). Kitesurfing (5th line adjustment). Open Cleat Aluminium or Nylon Fairlead Cleat Aluminium or Nylon. Compact to fit into small locations. Ideal when a rope is not always cleated. Fairlead strengthens cleat and allows quick fine adjustments of the rope. Helps hold rope into teeth when a line is flogging. Fairlead Cleat with Becket Large Becket makes it easy for frequent de-rigging. Aluminium only Side entry Cleat with Becket Aluminium only Side entry cleats gives the benefit of a fairlead but use of temporary cleating. Tapered Pad allows correct rope/cleating alignment. Cleats can be mounted either way round. Pads can be stacked to increase angle or create a riser block. Backplate provides support on Allows tensioning thin deck sections. without rubbing rope over teeth. Clamcleats Limited Watchmead Welwyn Garden City Hertfordshire AL7 1AP England Telephone 01707 330101 Fax 01707 321269 e-mail [email protected] www.clamcleat.co

Micros cleat range Nylon and Aluminium Material Selection Nylon cleats offer very good value for money and are ideal where high loads or rope surges are not likely to be encountered. Aluminium cleats are unaffected by the heat generated by a rope surging back through a cleat. Suitable for sub-zero temperatures. Good corrosion resistance. The Hard Anodised (AN) finish gives a high-tech and fashionable appearance as well as offering superior resistance to sea water corrosion. CL274 CL274W Can be fixed with standard screws and rivets, on tubular or flat surfaces.