Cleats for dinghy masts Some of the cleats suitable for use on dinghy masts. For 3mm-6mm, 1/8”-1/4”diameter ropes. CL268 Overleaf are some recommendations and suggestions on how to use our cleats on dinghy masts. For more information, search by cleat number on w w w. c l a m c l e a t . c o m All these cleats are also available with a hard anodised finish. For example CL278 = silver, CL278AN = hard anodised. Clamcleats Limited Welwyn Garden City AL7 1AP England t: +44 (0)1707 330101 e: sales@clamcleat.com www.clamcleat.co

Cleats for dinghy masts Ideas and suggestions CL222 CL222AN CL254 CL254AN Halyard rope wear Pulling the halyard through the cleat’s teeth when tensioning damages the rope and the cleat. 2 Cleat can be fixed slightly off-centre. Tension halyard then move across to cleat. Always tension the halyard before putting in the cleat. When correctly tensioned, the cleat always holds the same part of the halyard. This can cause rope wear and halyard slip. Suggestion:Every year, untie the top of the halyard from the sail headboard. Cut about 5cm, 2”, from the top of the halyard. Re-fix to sail. A new part...