Catalogs >
Clamcleat >
CL719 Leaflet

CL719 Leaflet
1Pages

Catalog excerpts

CL719 Tie-down cleat An aerial cleat that rigs like the trucker's hitch / wagoner’s hitch. Easy to use, can be fastened and released with one hand and operated from a distance. Low cost system, compared to other ways of lifting very long items in confined spaces. Non-conductive for electrical applications. Rear fairlead secures rope tail. Uses a single piece of rope. Safe working load of 150kg (350lb) with good quality 6mm (1/4") ropes. Developed by Clamcleats Ltd for Fisco International of Japan, the CL719 is used to lift heavy duty power and data cables into position, prior to permanent fixing. A number of cleats are used to lift and support long cables. Cables can be lifted without the use of machinery in areas with limited access. Each cleat can be tensioned from ground level, so a couple of people can install very long cables. The CL719 rig is also being used for steadying machinery during installation. Machines are accurately adjusted and positioned before beings bolted down. CL806 Use the CL806 Jiffy Tie for bundling cables. Low cost. Easy to use. The CL719 can be supplied on its' own, or with rope. www.clamcleat.com buy single cleats at cleats.co.uk Max working load using 6mmø (1/4”) rope is 150kg 350lbs

Open the catalog to page 1