Chetco Digital Instruments Chetco Digital Instruments, Inc. NMEA 2000â„¢ Display Gateway Converter  The NMEA 2000â„¢ Gateway Converter is a stand-alone NMEA 2000 interface adapter for SeaGauge Display Units. The device plugs into serial port and delivers real-time sensor data over the NMEA 2000 network to multiple display heads. The adapter works with our vDash application on Windows PC to enable real-time display and data logging from any Remote sensor units over the NMEA 2000 Bus. When used with SeaGauge color touch displays they become NMEA 2000 data viewer portals. The NMEA 2000 Converter Adapter allows you to use our SeaGauge Sensor Interface Units as a bridge between analog sensor data and digital displays on the NMEA 2000 Network. The 16 possible analog inputs are calibrated via downloadable sensor tables to allow for a virtually unlimited combination of instrumentation choices. A single unit can support up to three engines with RPM, Fuel Flow, Temp, OIL Pressure, Battery Voltage, and Fuel levels. Once on the NMEA 2000 Network, all data can be viewed from multiple locations with compatible, chart plotters/sonar units. The NMEA 2000 Converter Adapter comes with cables for direct connection between the Sensor Interface Unit and NMEA 2000 bus using standard Device Net terminations. Vendor Information There are yet no reviews for this product. Please log in to write a review. Copyright ©2016 - Chetco Digital Instruments, Inc. - http://www.digitalmarinegauges.com