*mynauticexpo

Catalogs
Cel Components s.r.l.
Sandwich panel ALUSTEP 500 SL

Sandwich panel ALUSTEP 500 SL

Product catalog summary

Overview: This document provides technical specifications for aluminium and thermoplastic honeycombs, laminates, and sandwich panels produced by CEL Components S.r.l. It includes details on materials, dimensions, mechanical properties, and compliance with standards.

Specifications:

Core Material: Aluminium honeycomb made from alloy series 3000, with hexagonal cells. Optional series 5000 available on demand.
Cell Diameter: Ø1/4” and Ø3/8” (on request).
Foil Thickness: 50 to 70 microns.
Skin Material: Glass fibre impregnated with epoxy resin, with a thickness ranging from 3.5 mm to 50 mm.

Panel Characteristics:

Thickness: Ranges from 3.5 mm to 50 mm.
Standard Panel Sizes: 1250 x 2500 mm and 1500 x 3000 mm, with custom sizes up to 1550 x 3050 mm available.
Thickness Tolerance: ±0.3 mm.
Dimension Tolerance: ±30 mm.
Skin Thickness: 0.4 mm with 500 gr/m² glass fibre.

Mechanical Performance:

Panel Weight: Varies with thickness, e.g., 1.9±0.2 Kg/m² for 5 mm thickness.
Compressive Strength: 2.9±0.3 MPa (ASTM C 365-365 M).
Maximum Load: Ranges from 130 N to 1000 N depending on panel thickness (ASTM C 393).
Deflection at Maximum Load: Varies from 42±6 mm to 6±1 mm.
Elastic Modulus: 26,000±2,000 MPa.
Peeling Resistance: >500 N/76 mm or >55 Nmm/mm (ASTM D1781-98).
Service Temperature: -50°C to +90°C.
Thermal Expansion Coefficient: 1.5 * 10^-5 °C-1.

Compliance with Standards:

Conforms to ASTM standards for water absorption, strength-transverse load, flatwise tensile strength, flame spread, and impact and cyclic wind pressure.

Disclaimer: The data provided is intended for informational purposes and does not imply any warranty regarding product properties or suitability for specific applications. Technical changes may occur without notice.

Catalog excerpts

Via Buozzi 25 - 40057 Cadriano (Bologna) Italy Tel. +39 051 782505 Fax +39 051 782477 www.cel.eu [email protected] P.IVA 04102600378 CCIAA BO 0339628 ALUMINIUM AND THERMOPLASTIC HONEYCOMBS, LAMINATES, SANDWICH PANELS ALUSTEP® 500 SL Panel's composition 490g/m2 impregnated with epoxy resin Thickness starting from 3,5 mm to 50 mm * Serie 5000 on demand ** 03/8" on request Technical data sheet for standard panels (dimensions, materials and special finishes on request) TECHNICAL CHARACTERISTICS * Tested by Internal Laboratory ** Tested by external Laboratory t All values refer to a panel made of aluminum honeycomb with a cell diameter 6 mm 56 kg/m3 and epoxy adhesive t Sample dimension with 4 support points (L, W) 540x540 ; distance among the lower points 500mm. COMPONENTS LIABILITY DISCLAIMER: The above data are to the best of our knowledge correct and are intended to give information about our products and their potential applications. No warranty is given or implied in respect of certain properties of the products or their suitability for a particular application. We reserve the right for technical changes without further notice. We guarantee impeccable product quality under our terms of sale.

Open the catalog to page 1

Via Buozzi 25 - 40057 Cadriano (Bologna) Italy Tel. +39 051 782505 Fax +39 051 782477 www.cel.eu [email protected] P.IVA 04102600378 CCIAA BO 0339628 ALUMINIUM AND THERMOPLASTIC HONEYCOMBS, LAMINATES, SANDWICH PANELS Standard dimensions (other dimensions available on request) - Dimension tolerance ±30mm Honeycomb core's properties 50 Microns LIABILITY DISCLAIMER: The above data are to the best of our knowledge correct and are intended to give information about our products and their potential applications. No warranty is given or implied in respect of certain properties of the products or their suitability...

Open the catalog to page 2

Sandwich panel ALUSTEP 500 SL

Sandwich panel ALUSTEP 500 SL

Catalog excerpts

All Cel Components s.r.l. catalogs and brochures