Desorber D10

Product catalog summary

Application Overview
The CJC™ Desorber D10 is a compact device designed for the separation of water from oils used in various applications such as thrusters, stern tubes, hydraulic systems, and synthetic fluids. It is particularly effective for smaller gears with limited oil volumes.

Key Advantages
The Desorber D10's water separation capability is unaffected by oil viscosity or additive packages, making it suitable for both mineral and synthetic oils, including stable emulsions. It can remove up to 0.2 liters of water per hour, maintaining low water content in systems.

Intended Use
The device is ideal for oil volumes under 2000 liters and operates effectively within a viscosity range of ISO VG 32-150.

Functionality
The desorption process utilizes heated air to absorb water from oil. Oil is preheated to 60ºC and exposed to a counter flow of cold, dry air, which quickly heats up and absorbs water until saturation. This process prevents issues such as viscosity changes, reduced filterability, and increased oil degradation.

Features

Removes water from emulsified oil
Extends the lifespan of oil and system components
Prevents uncontrolled shutdowns and reduces maintenance costs
Compact design suitable for tight spaces

Technical Specifications

Dimensions: Height 1000 mm, Length 570 mm, Width 570 mm
Weight: 100 kg
Water removal capacity: Max. 0.2 L/hour
Voltage: 1 x 230 V
Frequency: 50 or 60 Hz
Power consumption: 1.7 kW
Current: 11.3 A
Flow inlet: 45 L/hour
Flow outlet: 60 L/hour

Contact Information
C.C.JENSEN A/S, Løvholmen 13, DK-5700 Svendborg, Denmark
Phone: +45 6321 2014, Fax: +45 6222 4615, Email: [email protected], Website: www.cjc.dk

Catalog excerpts

Desorber D10 Water Separation from Oil - Max. 0.2 L/hour Applications: Thrusters, Stern Tubes, Hydraulics, Synthetic Fluids CJC™ Product Sheet THE APPLICATION CJC™ Desorber D10 - a very compact desorber - is used for separation of water from oils in Thrusters Stern Tubes Hydraulic Applications Synthetic Fluids • Smaller gears with smaller oil volumes The advantage of the CJC™ Desorbers are that the water separation ability is unaffected by viscosity and additive package. The Desorber treats mineral oils as well as synthetic fluids, and is even able to break stable emulsions. The Desorber D10 is able to remove 0.2 L/h of water, and is able to maintain the water content within systems to very low levels. Intended for: • Oil volumes less than 2000 L • Viscosity range ISO VG 32-150 The desorption process is based on the principle that heated air can effectively hold large quantities of water. In the Desorber the oil, preheated to 60ºC, is met by a counter flow of cold, dry air. The air is heated very quickly by the hot oil and absorbs any water present in the oil, until the air is saturated. Water in oil leads to change in viscosity, reduced filter ability, reduced lubricity, formation of rust and bacterial growth and increased degradation of the oil - all factors that lead to reduced lifetime of both system components and the oil. Dimensions CJC™ Desorber D10 Height Removes water even from emulsified oil Extends the lifetime of both oil and components Prevents uncontrolled shut downs and reduces maintenance costs Compact in size - fits through most hatches Power consumption Current Flow inlet (nominal flow) Flow outlet (nominal flow)

Open the catalog to page 1

Water Separation from Oil - Max. 0.2 L/hour Applications: Thrusters, Stern Tubes, Hydraulics, Synthetic Fluids BRIGHT IDEAS CJC™ Product Sheet Cooling System Control Panel This document has been prepared by C.C. Jensen A/S of Svendborg. Denmark, and remains the property of the company. Re- production or use of this document without the consent of CCJensen A/S or its subsidiaries is prohibited. All rights reserved. 01.10.2012 Uvholmen 13 • DK-5700 Svendborg • Denmark Page 2/2 [email protected] • www.cjc.dk

Open the catalog to page 2

Desorber D10

Desorber D10

Catalog excerpts

All C.C. Jensen catalogs and brochures

Archived catalogs