Cat C9 Genset Spec Sheet
4Pages

C9 MARINE GENERATOR SET 142 ekW 167 ekW 192 ekW 50 Hz, 1500 rpm CATERPILLAR® ENGINE SPECIFICATIONS Image is a representation only, and may not show optional attachments. I-6, 4-Stroke-Cycle-Diesel Emissions. . . . . . . . . . . . . . . . . IMO/EPA Tier 2 compliant Displacement . . . . . . . . . . . . . . . . . . . . . 8.8 L (538 cu. in.) Rated Engine Speed. . . . . . . . . . . . . . . . . . . . . . . . . . . 1500 Bore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 mm (4.41 in.) Stroke . . . . . . . . . . . . . . . . . . . . . . . . . . . 149 mm (5.87 in.) Aspiration . . . . . . . . . . . . . . . . Turbocharged-Aftercooled Governor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electronic Cooling System . . . . . . . . . . . . . . . . . . . . . . . . . . . Radiator Refill Capacity Cooling System. . . . . . . . . . . . . . . . . . . . 47.5 L (50.1 qt) Lube Oil System . . . . . . . . . . . . . . . . . . . . 32 L (33.8 qt) Oil Change Interval . . . . . . . . . . . . . . . . . . . . . . . . . . 500 hr Caterpillar Diesel Engine Oil 10W30 or 15W40 Rotation (from flywheel end) . . . . . . . Counterclockwise Flywheel and flywheel housing. . . . . . . . . . . . SAE No. 1 Flywheel Teeth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 Max. Exhaust Backpressure . . 10.0 kPa (40.2 in. water) STANDARD EQUIPMENT Air Inlet System Aftercooler, air cleaner, turbocharger Control System Electronic governor, Hydraulically actuated Electronically controlled Unit Injection (HEUI™) fuel system, Electronic Control Unit (ECU), enginemounted 40-pin dedicated customer connector, SAE J1939 data link Cooling System Radiator-cooled package (sized for up to 50°C ambient air) incorporating deaeration expansion tank, belt-driven centrifugal jacket water pump and fan Exhaust System Manifold and turbocharger, watercooled; 152 mm (6 in) round flanged outlet; elbow, dry Flywheels & Flywheel Housings Flywheel, SAE No. 1, 113 teeth; flywheel housing, SAE No. 1 Fuel System Fuel filter, front service; fuel transfer pump; fuel priming pump Generator 12 lead reconnectable, 3-phase brushless, separately excited from auxiliary winding to provide 300% short circuit current up to 10 seconds, 2/3 pitch, broad voltage band, IP23 water protection, solid state voltage regulator with integral voltage adjustment, Class H insulation, generator temperature rise exceeds marine society requirements for Class H insulation, 105° C @ 50° C ambient — prime, 85° C @ 50° C ambient — prime connection poles Instrumentation Instrument panel, electric service meter, start/stop switch, emergency stop button, maintenance due light, diagnostic light, warning light, maintenance clear switch, 15A breaker Lube System Crankcase breather; oil filter, RH service; oil filler, in valve cover; oil level gauge, LH service; oil pan; oil pan drain, LH; lubricating oil; engine oil pump (gear-driven) Mounting System Skiddable base frame, front support, anti-vibration isolators between base and engine-generator General Torsional vibration damper and guard; paint, Caterpillar yellow; lifting eyes; protective lifting covers; literature; variable engine wiring; battery disconnect switch; plastic wrap packaging OPTIONAL ATTACHMENTS Exhaust System Elbows, pipe, flexible fittings, flange, rain caps, mufflers, shields (shields required to meet MCS certification) Fuel System Fuel cooler, flexible fuel lines, fuel temperature sensors, fuel and oil shielding LEHM7182-00 Lube System Manual sump pumps, oil filler, duplex oil filters Marine Classification Society (MCS) MCS approvable packages available direct from the factory through ABS, BV, DNV, GL, and LR Power Take-offs Crankshaft pulley Page 1 of 2

C9 MARINE GENERATOR SET 142/167/192 ekW L W H DIMENSIONS PERFORMANCE DATA 142 ekW (178 kVA), 167 ekW (208 kVA), and 192 ekW (240 kVA) Radiator-Cooled 50 Hz Ratings at 1800 rpm Length 142 ekW (178 kVA) 167 & 192 ekW (208 & 240 kVA) Width All Height All Weight (wet) Weight (wet) MCS Specification 142 ekW (178 kVA) 167 ekW (208 kVA) 192 ekW (240 kVA) 142 ekW (178 kVA) 167 ekW (208 kVA) 192 ekW (240 kVA) 2755 mm (108.5 in) 2765 mm (108.7 in) 1047 mm (41.2 in) 1615 mm (63.6 in) 2091 kg (4610 lb) 2176 kg (4797.3 lb) 2241 kg (4940.6 lb) 2100 kg (4620 lb) 2185 kg (4807 lb) 2250 kg (4950 lb) % load...

C9 MARINE GENERATOR SET 163 ekW 203 ekW 238 ekW 60 Hz, 1800 rpm CATERPILLAR® ENGINE SPECIFICATIONS Image is a representation only, and may not show optional attachments. I-6, 4-Stroke-Cycle-Diesel Emissions . . . . . . . . . . . . . . . . . . . . . . IMO/EPA Tier 2 and CCNR Stage II compliant Displacement . . . . . . . . . . . . . . . . . . . . . 8.8 L (538 cu. in.) Rated Engine Speed. . . . . . . . . . . . . . . . . . . . . . . . . . . 1800 Bore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 mm (4.41 in.) Stroke . . . . . . . . . . . . . . . . . . . . . . . . . . . 149 mm...

PERFORMANCE DATA RATING CONDITIONS Power at declared engine speed is in accordance with ISO3046-1:2002E. Caterpillar maintains ISO9001:1994/QS-9000 approved engine test facilities to assure accurate calibration of test equipment. Electronically controlled engines are set at the factory at the advertised power corrected to standard ambient conditions. The published fuel consumption rates are in accordance with ISO3046-1:2002E. Fuel rates are based on fuel oil of 35° API [16°C (60°F)] gravity having an LHV of 42 780 kJ/kg (18,390 Btu/lb) when used at 29°C (85°F) and weighing 838.9 g/L (7.001...