1. Catalogs
  2. Caterpillar Marine Power Systems
  3. Cat C6.6 ACERT Genset Spec Sheet
video corpo

Cat C6.6 ACERT Genset Spec Sheet
1 /2Pages

Cat C6.6 ACERT Genset Spec Sheet

Cat C6.6 ACERT Genset Spec Sheet
1 /2Pages

Catalog excerpts

Cat C6.6 ACERT Genset Spec Sheet-1

C6.6 ACERT ® MARINE GENERATOR SET 100, 125, 143 ekW (125, 156, 178 kVA) 50 Hz 125, 150, 170 ekW (156, 187, 212 kVA) 60 Hz FEATURES AND BENEFITS • • • • • • • • • • • Image shown may not reflect actual engine SPECIFICATIONS I-6, 4-Stroke-Cycle-Diesel • EPA Tier 2/IMO compliant • 6.6 liter displacement • 50 Hz 1500 rpm/60 Hz 1800 rpm rated engine speed • 105 mm (4.13 in) bore x 127 mm (5.0 in) stroke • Turbocharged aftercooled aspiration • Electronically governed • Radiator, keel, or heat exchanger cooled • Refill capacity – Cooling system: 30 L (7.9 U.S. gal) — heat exchanger cooled 36L (9.5 U.S. gal) — radiator cooled – Lube oil system: 17.5 L (4.62 gal) • Counterclockwise rotation from flywheel end • 500-hour oil change interval • • Crankcase ventilation system Common rail fuel system 3 cooling options — heat exchanger, keel, and radiator 12 and 24V starter motor and battery charging alternator Mounted air cleaner 3-phase AREP generators which provide the functionality of a permanent magnet excitation system EMCP3 control panel with remote monitoring capability (MCS options available) Isolated sump Glowplugs aid starting in cold weather Gear-driven sea-water and jacket-water pumps Safety shutdowns for low oil pressure, high water temperature, and overspeed Worldwide Extended Service Coverage (ESC) available 6 available ratings to cover power demand of both 50 Hz and 60 Hz DIMENSIONS Front Right Side PACKAGE DIMENSIONS & WEIGHT (RANGE) Length Heat Exchanger/Keel Cooled Radiator Cooled 1833-2001 mm 2464-2632 mm 72.2-78.8 in. 97-103.6 in. Width Heat Exchanger/Keel Cooled Radiator Cooled 956 mm 956 mm 37.7 in. 37.7 in. Height Heat Exchanger/Keel Cooled Radiator Cooled 1315 mm 1315 mm 51.8 in. 51.8 in. 1426-1536 kg 3143.8-3386.15 lb Weight, Net Dry (approx) Heat Exchanger/Keel Cooled only Note: Do not use these dimensions for installation design. This is a preliminary document, not to be used for installation design.

 Open the catalog to page 1
Cat C6.6 ACERT Genset Spec Sheet-2

STANDARD EQUIPMENT Air cleaner, single element canistertype with service indicator and rain cap; dry insulated turbocharger; glowplug cold start system • Cooling System Radiator cooled package (sized for up to 50°C ambient air) incorporating deaeration expansion tank, plate-type engine oil cooler, gear-driven centrifugal jacket water pump, Caterpillar® Extended Life Coolant • Exhaust System Dry insulated turbocharger, water-cooled exhaust • Fuel System Primary fuel filter/water separator, secondary fuel filter (LH), fuel priming pump brushless, separately excited from auxiliary winding to provide...

 Open the catalog to page 2

All Caterpillar Marine Power Systems catalogs and brochures

  1. C12 ACERT

    5  Pages

  2. pl1000e

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.