video corpo

Cat 3616 (8158 mhp) Propulsion Spec Sheets - 4 Pages

Add to MyNauticExpo favorites
Cat 3616 (8158 mhp) Propulsion Spec Sheets

Catalog excerpts

Marine Propulsion Engine 3616 Fast Vessel 6000 bkW (8046 bhp) @ 1020 rpm CATERPILLAR® ENGINE SPECIFICATIONS V-16, 4-Stroke-Cycle-Diesel Emissions . . . . . . . . . . . . . . . . . . . . . . . . . . . IMO compliant Bore — mm (in) . . . . . . . . . . . . . . . . . . . . . . . . . . 280 (11.0) Stroke — mm (in) . . . . . . . . . . . . . . . . . . . . . . . . 300 (11.8) Displacement — L (cu in) . . . . . . . . . . . . . . . 296 (18,062) Rotation (from flywheel end) . . . . . . . . . . . . CCW or CW Compression Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.6:1 Aspiration . . . . . . . . . . . . . . . . Turbocharged-Aftercooled Low Idle Speed — rpm. . . . . . . . . . . . . . . . . . . . . . . . . . 350 Rated Speed — rpm . . . . . . . . . . . . . . . . . . . . . . . . . . . 1020 Average Piston Speed — m/s (ft/s). . . . . . . . . 10.5 (34.4) Engine Firing Pressure — bar (psi) . . . . . . . . 175 (2,538) BMEP — bar (psi) . . . . . . . . . . . . . . . . . . . . . . . . . 23.9 (346) BSFC — g/bkW-h (lb/hp-h) . . . . . . . . . . . . . . . . . 206 (.339) PERFORMANCE DATA 3616 @ 1020 rpm 6000 Engine Power bkW Speed Prop Demand BSFC* rpm Continuous Intermittent Curve g/bkw-hr bkW 5000 4000 1020 950 900 800 700 600 500 3000 2000 1000 0 6000 5579 4732 3327 2102 1327 813 6000 5579 4960 3486 2332 1461 846 6000 4848 4122 2895 1939 1221 707 206 200 204 209 215 218 219 *At Propeller Demand Curve 400 Intermittent 600 rpm Continuous 800 1000 Prop LEHM1880-01

 Open the catalog to page 1

3616 MARINE PROPULSION ENGINE — 6000 bkW (8046 bhp) STANDARD EQUIPMENT Air Intake and Exhaust Systems High flow turbochargers, inlet air silencers, and charge air cooler; dry manifold with soft shielding and compressor bypass system; optional front- and rear-mounted turbochargers Basic Engine Arrangement Vee engine with one-piece grey iron engine block; individual cylinder heads with four intake/exhaust valves; fuel unit injectors, injection pressure 1620 bar; right-hand service side available Cooling System Separate circuit system, jacket water inlet temperature 90°C; air and oil cooler...

 Open the catalog to page 2

03 02 3616 MARINE PROPULSION ENGINE — 6000 bkW (8046 bhp) 5872 Rear Face of Crankshaft Adapter 1871 3541 Centerline of Crankshaft 01 01 Centerline of Engine 100 03 Flywheel Mtg. Face 01 Right Side View of Engine 02 01 Front View of Engine Engine Overall Length mm (in) Overall Width mm (in) Overall Height mm (in) 3616 5872 (231) 1871 (74) 3541 (139) Engine Weights Engine Dry Weight kg (lb) 31 000 (68,350) Shipped Loose Items: Torsional Coupling Fresh Water Plate-Type Heat Exchanger Lube Oil Plate-Type Heat Exchanger Instrument/Alarm Panel 435 (957) 295 (650) 635 (1,397) 200 (440) Fluids:...

 Open the catalog to page 3

3616 MARINE PROPULSION ENGINE — 6000 bkW (8046 bhp) RATING DEFINITIONS AND CONDITIONS COMMERCIAL FAST VESSEL RATING – 85% of operating hours at rated speed, 15% of hours at less thatn 50% rated power. TBO approximately 20,000-25,000 hours. Propeller demand curves are shown through 100% power. The propulsion system design should consider heavy ship condition, sea state, hull fouling and propulsion system power losses for proper match between engine and prop/jet. MILITARY FAST VESSEL RATING – Higher ratings availble for military load profile. maximum temperature requirements of 45°C (113°F)...

 Open the catalog to page 4

All Caterpillar Marine Power Systems catalogs and brochures

  1. C175 - Brochure

    4 Pages

  2. pl1000e

    2 Pages

  3. Brochure M 20 C

    9 Pages

  4. Cat 3054 Genset

    8 Pages

Archived catalogs